Hioki IM3536 DC LCR Meter, 4Hz to 8MHz

Model: IM3536

Downloads: datasheet manual

Hioki IM3536 DC LCR Meter, 4Hz to 8MHz

Model: IM3536

Delivers a guaranteed accuracy range that starts at 1 mΩ. The frequency band has been expanded to 8 MHz, broadening the array of measurement targets with which it can be used.

Your Price	$4939.00 USD
Availability	11 to 12 Weeks
Quantity	Quantity

Recommended Accessories

Hioki L2001 Pincher Probe, DC to 8MHz

L2001

Hioki 9500-10 4-Terminal Probe, DC to 200 kHz, 3.28'

9500-10

Hioki 9268-10 DC Bias Voltage Unit, 40Hz to 8MHz, ±40VDC

9268-10

Hioki 9261-10 Test Fixture for IM Series LCR Meters, DC to 8 MHz, 50 Ω Impedance

9261-10

Hioki 9140-10 4-Terminal Probe, DC to 200kHz, 3.28ft

9140-10

Hioki L2000 Four Terminal Test Lead

L2000

Hioki IM3536 Offers

Delivers repeatability that is an order of magnitude better than that of previous products. This level of performance makes the instrument ideal for use in applications such as electrolytic capacitor low-ESR measurement and power supply coil impedance testing, the latter of which demands excellent frequency characteristics.

Features

DC, 4Hz to 8MHz measurement frequency
High-speed measurement of 1ms (fastest time)
High-precision measurement of ±0.05% rdg. (representative value)
Guaranteed accuracy range from 1 mΩ, low-impedance measurement with unmatched repeatability
DC bias function: Measure under conditions simulating actual use or in accordance with industry standards
Exceptional specifications and cost-performance for a wide range of applications, from R&D to production lines

This product is not supplied with the measuremnt probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately.

Applications

Electronic component research, development, and production.

Hioki IM3536 Specifications

Measurement Modes	LCR mode, Continuous measurement mode
Measurement Parameters	Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), σ, ε
Measurement Range	100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z)
Display Range	Z: 0.00 m to 9.99999 GΩ, Rs, Rp, Rdc X: ±(0.00 m to 9.99999 GΩ) G, B: ±(0.000 n to 9.99999 GS) Ls, Lp: ±(0.00000 µ to 9.99999 GH) Cs, Cp: ±(0.0000 p to 9.99999 GF) Y: 0.000 n to 9.99999 GS θ: ±(0.000° to 999.999°) Q: ±(0.00 to 9999.99) D: ±(0.00000 to 9.99999) Δ %: ±(0.000 % to 999.999%)
Basic Accuracy	Z: ±0.05% rdg. θ: ±0.03° (representative value, measurable range: 1 mΩ to 200 MΩ)
Measurement Frequency	4 Hz to 8 MHz (10 mHz to 100 Hz steps)
Measurement Signal Level	[Normal mode: V mode/CV mode] 4 Hz to 1.0000 MHz: 10 mV to 5 V (maximum 50 mA) 1.0001 MHz to 8 MHz: 10 mV to 1 V (maximum 10mA) [Low impedance high accuracy mode: V mode/CV mode] 4 Hz to 1.0000 MHz: 10 mV to 1 V (maximum 100 mA) [Normal mode: CC mode] 4 Hz to 1.0000 MHz: 10 µA to 50 mA (maximum 5 V) 1.0001 MHz to 8 MHz: 10 µA to 10 mA (maximum 1 V) [Low impedance high accuracy mode: CC mode] 4 Hz to 1.0000 MHz: 10 µA to 100 mA (maximum 1 V) [DC resistance measurement] Measurement Signal level: Fixed at 1 V
DC Bias Measurement	Generating range: DC voltage 0 V to 2.50V (10mV resolution) In low Z high accuracy mode: 0 V to 1V (10mV resolution)
Output Impedance	Normal mode: 100 Ω Low impedance high accuracy mode: 10Ω
Display	5.7-inch color TFT with touch panel
Functions	Comparator, BIN measurement (10 categories for 2 measurement parameters), Trigger function, Open/short compensation, Contact check, Panel loading/saving, Memory function
Interfaces	EXT. I/O( HANDLER), USB, USB flash drive, LAN, GP-IB, RS-232C, BCD
Power Supply	100 to 240V AC, 50/60 Hz, 50 VA max.
Dimensions and Mass	330 mm (12.99") × 119 mm (4.69") × 230 mm (9.06") 4.2 kg (148.1 oz)

Click here for complete specifications on the Hioki IM3536

What's included with the Hioki IM3536

Power Cord
Instruction Manual
LCR Application Disc (Communication commands user manual)

datasheet for the Hioki IM3536 DC LCR Meter, 4Hz to 8MHz manual for the Hioki IM3536 DC LCR Meter, 4Hz to 8MHz

Click on a category to view a selection of compatible accessories with the Hioki IM3536 DC LCR Meter, 4Hz to 8MHz.

Probe and Text Fixture

Hioki 9262 Test Fixture, DC to 8MHz 9262

Use this test fixure with your compatible LCR meter to measure frequencies from DC to 8MHz. The fixture uses a direct connection for simple setup.

Hioki IM9110 SMD Test Fixture for LCRs IM9110

Use this fixture with select Hioki LCRs (sold separately). It is suited to measure ultra-small material.

Hioki IM9100 SMD Test Fixture for LCRs IM9100

Use this fixture with select Hioki LCRs (sold separately). It is suited to measure ultra-small material.

Hioki L2001 Pincher Probe, DC to 8MHz L2001

Use this pincher probe to measure the impedance or frequency of select devices. The probe is equipped with fixed standard contact tips.

Hioki 9500-10 4-Terminal Probe, DC to 200 kHz, 3.28' 9500-10

When you connect this probe to your compatible IM Series LCR impedance analyzer model, you can evaluate frequencies from DC to 200 kHz. The probe measures 3.28' (1 m) long.

Hioki 9269-10 DC Bias Current Unit, 40Hz to 2MHz, 2A DC 9269-10

Use the direct connection to set up this DC bias current unit with your Hioki IM Series LCR meter. The unit offers a maximum applied current of 2A DC.

Hioki 9268-10 DC Bias Voltage Unit, 40Hz to 8MHz, ±40VDC 9268-10

With this DC bias voltage unit, your IM Series LCR meter can measure applied voltage of ±40VDC. The unit is equipped with a direct connection.

Hioki 9261-10 Test Fixture for IM Series LCR Meters, DC to 8 MHz, 50 Ω Impedance 9261-10

Use this test fixture with your compatible LCR meter to measure frequencies from DC to 8 MHz. The unit also offers 50 Ω impedance.

Hioki 9151-02 GP-IB Connector Cable, 6.56ft 9151-02

This cable can be used to connect your compatible device to your select Hioki impedance analyzer. The cable is equipped with GP-IB connectors.

Hioki 9140-10 4-Terminal Probe, DC to 200kHz, 3.28ft 9140-10

Use this probe with your compatible Hioki LCR meter model to measure frequencies from DC to 200kHz. The probe is equipped with a 4-terminal pair configuration.

Hioki 9699 SMD Test Fixture, DC to 120 MHz 9699

Make accurate measurements with this SMD test fixture. Compatible with select Hioki LCR meters, this unit offers a frequency of DC to 120 MHz.

Hioki 9677 SMD Test Fixture, DC to 120MHz 9677

Make accurate measurements with this SMD test fixture. Compatible with select Hioki LCR meters, this unit offers a frequency of DC to 120MHz.

Hioki 9263 SMD Test Fixture, DC to 8MHz 9263

Make accurate measurements with this SMD test fixture. Compatible with select Hioki LCR meters, this unit offers a frequency of DC to 8MHz.

Hioki L2000 Four Terminal Test Lead L2000

Description ➕➖

Hioki IM3536 Offers

Features

DC, 4Hz to 8MHz measurement frequency
High-speed measurement of 1ms (fastest time)
High-precision measurement of ±0.05% rdg. (representative value)
Guaranteed accuracy range from 1 mΩ, low-impedance measurement with unmatched repeatability
DC bias function: Measure under conditions simulating actual use or in accordance with industry standards
Exceptional specifications and cost-performance for a wide range of applications, from R&D to production lines

This product is not supplied with the measuremnt probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately.

Applications

Electronic component research, development, and production.

Specifications ➕➖

Hioki IM3536 Specifications

Measurement Modes	LCR mode, Continuous measurement mode
Measurement Parameters	Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ), σ, ε
Measurement Range	100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z)
Display Range	Z: 0.00 m to 9.99999 GΩ, Rs, Rp, Rdc X: ±(0.00 m to 9.99999 GΩ) G, B: ±(0.000 n to 9.99999 GS) Ls, Lp: ±(0.00000 µ to 9.99999 GH) Cs, Cp: ±(0.0000 p to 9.99999 GF) Y: 0.000 n to 9.99999 GS θ: ±(0.000° to 999.999°) Q: ±(0.00 to 9999.99) D: ±(0.00000 to 9.99999) Δ %: ±(0.000 % to 999.999%)
Basic Accuracy	Z: ±0.05% rdg. θ: ±0.03° (representative value, measurable range: 1 mΩ to 200 MΩ)
Measurement Frequency	4 Hz to 8 MHz (10 mHz to 100 Hz steps)
Measurement Signal Level	[Normal mode: V mode/CV mode] 4 Hz to 1.0000 MHz: 10 mV to 5 V (maximum 50 mA) 1.0001 MHz to 8 MHz: 10 mV to 1 V (maximum 10mA) [Low impedance high accuracy mode: V mode/CV mode] 4 Hz to 1.0000 MHz: 10 mV to 1 V (maximum 100 mA) [Normal mode: CC mode] 4 Hz to 1.0000 MHz: 10 µA to 50 mA (maximum 5 V) 1.0001 MHz to 8 MHz: 10 µA to 10 mA (maximum 1 V) [Low impedance high accuracy mode: CC mode] 4 Hz to 1.0000 MHz: 10 µA to 100 mA (maximum 1 V) [DC resistance measurement] Measurement Signal level: Fixed at 1 V
DC Bias Measurement	Generating range: DC voltage 0 V to 2.50V (10mV resolution) In low Z high accuracy mode: 0 V to 1V (10mV resolution)
Output Impedance	Normal mode: 100 Ω Low impedance high accuracy mode: 10Ω
Display	5.7-inch color TFT with touch panel
Functions	Comparator, BIN measurement (10 categories for 2 measurement parameters), Trigger function, Open/short compensation, Contact check, Panel loading/saving, Memory function
Interfaces	EXT. I/O( HANDLER), USB, USB flash drive, LAN, GP-IB, RS-232C, BCD
Power Supply	100 to 240V AC, 50/60 Hz, 50 VA max.
Dimensions and Mass	330 mm (12.99") × 119 mm (4.69") × 230 mm (9.06") 4.2 kg (148.1 oz)

Click here for complete specifications on the Hioki IM3536

Included ➕➖

What's included with the Hioki IM3536

Power Cord
Instruction Manual
LCR Application Disc (Communication commands user manual)

Resources ➕➖

datasheet for the Hioki IM3536 DC LCR Meter, 4Hz to 8MHz manual for the Hioki IM3536 DC LCR Meter, 4Hz to 8MHz

Accessories ➕➖

Click on a category to view a selection of compatible accessories with the Hioki IM3536 DC LCR Meter, 4Hz to 8MHz.

Probe and Text Fixture

Hioki 9262 Test Fixture, DC to 8MHz 9262

Use this test fixure with your compatible LCR meter to measure frequencies from DC to 8MHz. The fixture uses a direct connection for simple setup.

Hioki IM9110 SMD Test Fixture for LCRs IM9110

Use this fixture with select Hioki LCRs (sold separately). It is suited to measure ultra-small material.

Hioki IM9100 SMD Test Fixture for LCRs IM9100

Use this fixture with select Hioki LCRs (sold separately). It is suited to measure ultra-small material.

Hioki L2001 Pincher Probe, DC to 8MHz L2001

Use this pincher probe to measure the impedance or frequency of select devices. The probe is equipped with fixed standard contact tips.

Hioki 9500-10 4-Terminal Probe, DC to 200 kHz, 3.28' 9500-10

When you connect this probe to your compatible IM Series LCR impedance analyzer model, you can evaluate frequencies from DC to 200 kHz. The probe measures 3.28' (1 m) long.

Hioki 9269-10 DC Bias Current Unit, 40Hz to 2MHz, 2A DC 9269-10

Use the direct connection to set up this DC bias current unit with your Hioki IM Series LCR meter. The unit offers a maximum applied current of 2A DC.

Hioki 9268-10 DC Bias Voltage Unit, 40Hz to 8MHz, ±40VDC 9268-10

With this DC bias voltage unit, your IM Series LCR meter can measure applied voltage of ±40VDC. The unit is equipped with a direct connection.

Hioki 9261-10 Test Fixture for IM Series LCR Meters, DC to 8 MHz, 50 Ω Impedance 9261-10

Use this test fixture with your compatible LCR meter to measure frequencies from DC to 8 MHz. The unit also offers 50 Ω impedance.

Hioki 9151-02 GP-IB Connector Cable, 6.56ft 9151-02

This cable can be used to connect your compatible device to your select Hioki impedance analyzer. The cable is equipped with GP-IB connectors.