"Our job is helping you do your job"
Engineered for high-current industrial applications, this clamp meter provides True RMS measurements up to 2000 A AC and features a slim, durable jaw for easy access in tight electrical panels. Bundled with the Z3210 Wireless Adapter, it enables seamless Bluetooth® data transfer, optimizing field diagnostics and reporting.
Engineered for high-current industrial applications, this clamp meter provides True RMS measurements up to 2000 A AC and features a slim, durable jaw for easy access in tight electrical panels. Bundled with the Z3210 Wireless Adapter, it enables seamless Bluetooth® data transfer, optimizing field diagnostics and reporting.
Easy! Just connect the Z3210 Wireless Adapter to your Hioki compatible instrument, to make it Bluetooth® ready.
Wirelessly connect Hioki-compliant instruments with a simple connection.
Transfer measurements to your smartphone or tablet and quickly create reports with field photos and drawings.
Features
DC High V Probe Mode
Wireless support
When the Wireless Adapter Z3210 is installed, Bluetooth® wireless communication is enabled. It transfers measurements to your smartphone or tablet and allows you to quickly create reports with field photos and drawings.
Excel® Direct Input Function
Boost work efficiency in the field by letting you directly transfer measurement data to (i.e., enter measured values directly into) templates created as Excel®.
Harmonic measurement
When combined with GENNECT Cross (*), you can perform simple harmonic analysis. Applications include problem analysis of power supply systems.
*GENNECT Cross is an free app that lets you connect field measuring instruments to smartphones and tablets using Bluetooth® communications. Wireless Adapter Z3210 (sold separately) is required in order to pair the instrument with GENNECT Cross.
Clamp Sensor gets between wires even with Large Jaw Diameter
Despite the ability to measure up to 2000 A AC afforded by the large sensor with φ55mm core diameter, the clamp meter’s innovative jaw design lets you get between the narrow spaces between crowded cables with absolute ease. In addition, electrical panels are sometimes so crowded that you need to push and pull to the clamp to get it around the cable. The CM4141-50 features a robust construction that delivers strength while letting you weave through complex wiring to get to the right cable, vastly improving work efficiency and speed.
Compared with clamp meters of similar class, the meter weighs only 300 g, at least 100 g lighter than competitors, letting you use the instrument over long work days with significantly less effort and physical strain.
Applications
| AC Current Range | 60.00 to 2000 A, 3 ranges (45 Hz to 1 kHz, True RMS) Basic accuracy 45-66 Hz: ±1.5% rdg. ±0.08 A (60 A range) |
| Crest factor | For the 60.00 A range: 2.5 (greater than 50.00 A and less than or equal to 60.00 A) to 2000 A range: 1.5 (2000 A or less) |
| DC Voltage Range | 600.0 ｍV to 1000 V (when using P2010: 600.0 to 2000 V) |
| AC Voltage Range | 6.000 to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS) Basic accuracy 45-66 Hz: ±0.9% rdg. 0.003 V (at 6 V) |
| DC+AC Voltage Range | 6.000 to 1000 V, 4 ranges Basic accuracy DC, 45-66 Hz: ±1.0% rdg. ±0.013 V (at 6 V) |
| Resistance Range | 600.0 Ω to 6.000 MΩ, 5 ranges Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω) |
| Electrostatic Capacity Range | 1.000 to 1000 μF, 4 ranges Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF) |
| Frequency Range | Voltage: 9.999 to 999.9 Hz 3 ranges Current: 99.99 Hz to 999.9 Hz 2 ranges Basic accuracy: ±0.1% rdg. ±0.01 Hz (at 99.99 Hz) |
| Temperature (K) | -40 to 752°F (-40.0 to 400.0˚C) Basic accuracy: ±0.5% rdg. ±5.4°F (±3.0˚C) + temperature probe accuracy |
| Harmonic Levels | [With Z3210 installed] Harmonic levels up to 30th, content factor, total harmonic distortion ratio Displayed via GENNECT Cross app |
| Other Functions | Continuity check, Diode check, Automatic AC/ DC detection (Voltage check only), Max/ Min/ AVG/ Peak waveform MAX/ Peak waveform MIN value display, Low-pass filter function, Display value hold, Backlight, Auto power save, Buzzer sound, Zero-adjustment, and other function |
| Dustproof, Waterproof | IP20 (current measurement of voltage or hazardous live conductors under completely dry condition. Do not use when wet.) IP50 (when measuring resistance, or current of an insulated conductor (completely dry), and in storage) |
| Power Supply | LR03 Alkaline battery ×2 Continuous use: approximately 48 hours (without Z3210 installed), approx. 24 hours (with Z3210 installed and using wireless communications) Other conditions: 100 A AC measurement, backlight off, 23°C reference value |
| Core Jaw Diameter | φ2.17" (55 mm) Jaw dimension: 3.23 x 0.43" (82 x 11 mm), dimension is a range value of 1.73" (44 mm) from the tip of the jaw |
| Smallest Dimension of Jaw Cross-Section | 0.43" (11 mm), range value of 1.73" (44 mm) from the tip of the jaw |
| Dimensions | 2.56 x 9.72 x 1.38" (65 x 247 x 35 mm) |
| Weight | 10.6 oz (300 g) |
| AC Current Range | 60.00 to 2000 A, 3 ranges (45 Hz to 1 kHz, True RMS) Basic accuracy 45-66 Hz: ±1.5% rdg. ±0.08 A (60 A range) |
| Crest factor | For the 60.00 A range: 2.5 (greater than 50.00 A and less than or equal to 60.00 A) to 2000 A range: 1.5 (2000 A or less) |
| DC Voltage Range | 600.0 ｍV to 1000 V (when using P2010: 600.0 to 2000 V) |
| AC Voltage Range | 6.000 to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS) Basic accuracy 45-66 Hz: ±0.9% rdg. 0.003 V (at 6 V) |
| DC+AC Voltage Range | 6.000 to 1000 V, 4 ranges Basic accuracy DC, 45-66 Hz: ±1.0% rdg. ±0.013 V (at 6 V) |
| Resistance Range | 600.0 Ω to 6.000 MΩ, 5 ranges Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω) |
| Electrostatic Capacity Range | 1.000 to 1000 μF, 4 ranges Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF) |
| Frequency Range | Voltage: 9.999 to 999.9 Hz 3 ranges Current: 99.99 Hz to 999.9 Hz 2 ranges Basic accuracy: ±0.1% rdg. ±0.01 Hz (at 99.99 Hz) |
| Temperature (K) | -40 to 752°F (-40.0 to 400.0˚C) Basic accuracy: ±0.5% rdg. ±5.4°F (±3.0˚C) + temperature probe accuracy |
| Harmonic Levels | [With Z3210 installed] Harmonic levels up to 30th, content factor, total harmonic distortion ratio Displayed via GENNECT Cross app |
| Other Functions | Continuity check, Diode check, Automatic AC/ DC detection (Voltage check only), Max/ Min/ AVG/ Peak waveform MAX/ Peak waveform MIN value display, Low-pass filter function, Display value hold, Backlight, Auto power save, Buzzer sound, Zero-adjustment, and other function |
| Dustproof, Waterproof | IP20 (current measurement of voltage or hazardous live conductors under completely dry condition. Do not use when wet.) IP50 (when measuring resistance, or current of an insulated conductor (completely dry), and in storage) |
| Power Supply | LR03 Alkaline battery ×2 Continuous use: approximately 48 hours (without Z3210 installed), approx. 24 hours (with Z3210 installed and using wireless communications) Other conditions: 100 A AC measurement, backlight off, 23°C reference value |
| Core Jaw Diameter | φ2.17" (55 mm) Jaw dimension: 3.23 x 0.43" (82 x 11 mm), dimension is a range value of 1.73" (44 mm) from the tip of the jaw |
| Smallest Dimension of Jaw Cross-Section | 0.43" (11 mm), range value of 1.73" (44 mm) from the tip of the jaw |
| Dimensions | 2.56 x 9.72 x 1.38" (65 x 247 x 35 mm) |
| Weight | 10.6 oz (300 g) |
