"Our job is helping you do your job"
Use this clamp-on probe to test the current of 50/60Hz commercial power lines. The probe is able to measure 10 to 500A AC.
Use this clamp-on probe to test the current of 50/60Hz commercial power lines. The probe is able to measure 10 to 500A AC.
When connected to your digital multimeter or Memory HiCorder, the Hioki 9018-50 Clamp-On AC Probe provides reliable measurement and analysis of 10 to 500 A AC. The BNC output terminal enables simple setup.
Features
| Rated Current | 10 to 500 A AC, 6 ranges |
| Accuracy | ±1.5% of reading ±0.1% f.s. (45 to 66 Hz) |
| Output Rate | 0.2 VAC f.s. |
| Maximum Allowable Input | 150 Arms continuous (10/20/50 A ranges), 400 Arms continuous (100/200 A ranges), 650 Arms continuous (500 A range), 100% for 40 to 100 Hz, within 50% of derating for 100 Hz to 1 kHz |
| Maximum Rated Voltage to Earth | 600 Vrms (50/60 Hz, Cat III) |
| Output Terminal | BNC |
| Core Diameter | 1.81" (46 mm) |
| CE Compliant | Yes |
| Product Length | 1.38" (35 mm) |
| Product Width | 3.07" (78 mm) |
| Product Height | 7.4" (188 mm) |
| Product Weight | 14.8 oz (420 g) |
| Rated Current | 10 to 500 A AC, 6 ranges |
| Accuracy | ±1.5% of reading ±0.1% f.s. (45 to 66 Hz) |
| Output Rate | 0.2 VAC f.s. |
| Maximum Allowable Input | 150 Arms continuous (10/20/50 A ranges), 400 Arms continuous (100/200 A ranges), 650 Arms continuous (500 A range), 100% for 40 to 100 Hz, within 50% of derating for 100 Hz to 1 kHz |
| Maximum Rated Voltage to Earth | 600 Vrms (50/60 Hz, Cat III) |
| Output Terminal | BNC |
| Core Diameter | 1.81" (46 mm) |
| CE Compliant | Yes |
| Product Length | 1.38" (35 mm) |
| Product Width | 3.07" (78 mm) |
| Product Height | 7.4" (188 mm) |
| Product Weight | 14.8 oz (420 g) |
