"Our job is helping you do your job"
These transmitters allow professionals to monitor pressure in ducts, rooms, or total building pressure. They give indication of clean room pressures and can be used in a variety of pressure and flow applications. Find a wide selection of these transmitters to fit your application.
Monitor differential pressure in air/liquid flow systems, HVAC/R automation, pneumatic systems and process control with the Series 647 Wet/Wet Differential Pressure Transmitter. Units are temperature compensated and provide a 4 to 20 mA output signal.
Monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.
Positive, negative and differential pressures can be measured within a full span accuracy of ±0.25. Units are enclosed in a polycarbonate case, rated NEMA 4X (IP66) and operate by sensing the pressure of air and compatible gases then sending a standard 4-20 mA output signal. Design enables operation in 2-wire current loops
Provides for both visual monitoring and electronic control of very low differential pressure. The 605 Series is ideal for control applications in building HVAC/R systems where local indication is desired during routine maintenance checks or necessary when trouble shooting the system.
Designed to measure pressures as low as 0.1 in w.c. with ±0.4% accuracy. The transmitter features 15 psid overpressure, reverse polarity protection and EMI/RFI protection. The NEMA 4 housing allows for versatile mounting locations and integral mounting tabs simplify installation.
Capable of measuring low pressures with a ±1% accuracy - ideally suited for proper building pressurization and air flow control. Can withstand up to 10 psig overpressure with no damage to the unit. Variable capacitance sensor design provides excellent sensitivity and long-term stability. Units also feature reverse-polarity protection.
Senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The housing is specifically designed to mount on a 35 mm DIN rail in a panel. Mounting style allows for several units to be mounted closely together reducing required space. The span and zero controls are for use when checking calibration.
