"Our job is helping you do your job"
Reliable and accurate, this mercury-free power switch eliminates the need for costly heat sinks and the need to wire multiple command signals. Suitable for many applications, this power switch features one pole and a 100 to 120 V AC load voltage. In addition, this switch features millions of cycles.
Reliable and accurate, this mercury-free power switch eliminates the need for costly heat sinks and the need to wire multiple command signals. Suitable for many applications, this power switch features one pole and a 100 to 120 V AC load voltage. In addition, this switch features millions of cycles.
Discontinued!
This product has been discontinued and is no longer available. There are no replacement options.
We can help you find what you need:
Work with this power switch that offers longer contact life and higher performance for foodservice equipment operators. In addition, this switch features fast cycle times.
Features
Applications
| Number of Poles | 1 |
| Voltage | Load: 100 to 120 V AC Command signal: High voltage 100 to 240 V AC 10/-15% (85 to 264 V AC). On the 100 to 240 V AC input models, do not use a RC snubber on the E-SAFE II relay input or the temperature control command signal output |
| Output Amperage | Up to 35 A single, dual and three-phase |
| Operating Environment | 32 to 158°F (0 to 70°C) operating temperature 0 to 90% RH (relative humidity), non-Operational life: four million switching cycles Installation category III, pollution degree 2 |
| Control Mode | NO-ARC hybrid contactor |
| LED Indicator Light | Built in LED assists in trouble shooting; LED “off” indicates relay(s) are open, LED “on” indicates relay(s) are closed |
| Input Command Signal Terminals | 0.25" (6.35 mm) fast on appliance |
| Line and Load Terminals | No. 10 screw will accept ring or spade, 0.25" (6.35 mm) x 10-32 |
| Mounting | Back panel mount, horizontal or vertical mounting options |
| Number of Poles | 1 |
| Voltage | Load: 100 to 120 V AC Command signal: High voltage 100 to 240 V AC 10/-15% (85 to 264 V AC). On the 100 to 240 V AC input models, do not use a RC snubber on the E-SAFE II relay input or the temperature control command signal output |
| Output Amperage | Up to 35 A single, dual and three-phase |
| Operating Environment | 32 to 158°F (0 to 70°C) operating temperature 0 to 90% RH (relative humidity), non-Operational life: four million switching cycles Installation category III, pollution degree 2 |
| Control Mode | NO-ARC hybrid contactor |
| LED Indicator Light | Built in LED assists in trouble shooting; LED “off” indicates relay(s) are open, LED “on” indicates relay(s) are closed |
| Input Command Signal Terminals | 0.25" (6.35 mm) fast on appliance |
| Line and Load Terminals | No. 10 screw will accept ring or spade, 0.25" (6.35 mm) x 10-32 |
| Mounting | Back panel mount, horizontal or vertical mounting options |
