"Our job is helping you do your job"
This is a closable mid-sized tool pouch in a new black and Hi-Viz yellow color scheme. It is identical to other TP-XXL bags and includes integral side-mounted padded pockets for separate meter or tool storage. The TP-XXL SPECIAL OPS also features our proprietary V-SWAP™ system of interchangeable panels, so you can create multiple configurations based upon your needs.
This is a closable mid-sized tool pouch in a new black and Hi-Viz yellow color scheme. It is identical to other TP-XXL bags and includes integral side-mounted padded pockets for separate meter or tool storage. The TP-XXL SPECIAL OPS also features our proprietary V-SWAP™ system of interchangeable panels, so you can create multiple configurations based upon your needs.
The TP-XXL SPECIAL OPS edition comes with the V-SWAP Front Panel, V-SWAP Tool Panel, and the V-SWAP 2-Bit at 4-Bit Pocket Panels. Some additional panels are available and sold separately.
Features
Keep the Zippers Clean and Lubricated
Over time, dirt and grit will "clog" the zipper coils, preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils, scrub them with soapy water; a toothbrush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax, or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed, the zipper will not function and, in most cases, is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
| Internal Volume | 710 in3 (12 L) |
| Maximum Payload | 30 lbs (14 kg) |
| Handle Height | 22" (56 cm) |
| Tablet Pocket Dimensions | 11 x 9 x 1" (27.94 x 22.86 x 2.54 cm) |
| Dimensions | 15 x 15 x 8" (38 x 38 x 20.5 cm) |
| Weight | 7 lbs (3.25 kg) |
Click on a category to view a selection of compatible accessories with the Veto Pro Pac VPP10855 TP-XXL Special OPS with 12 L volume and 30 lbs maximum payload.
| Internal Volume | 710 in3 (12 L) |
| Maximum Payload | 30 lbs (14 kg) |
| Handle Height | 22" (56 cm) |
| Tablet Pocket Dimensions | 11 x 9 x 1" (27.94 x 22.86 x 2.54 cm) |
| Dimensions | 15 x 15 x 8" (38 x 38 x 20.5 cm) |
| Weight | 7 lbs (3.25 kg) |
Click on a category to view a selection of compatible accessories with the Veto Pro Pac VPP10855 TP-XXL Special OPS with 12 L volume and 30 lbs maximum payload.
