"Our job is helping you do your job"
This pneumatic aircraft drill utilizes a 0.9 HP motor to reach 6,000 RPM for continuous precision drilling in alloys. It incorporates fully caged gears with needle bearings and a 1/4" Jacobs industrial chuck to maintain performance under load. Furthermore, the handle includes a built-in silencing system for the exhaust and a vibration-reducing coating to assist with operator comfort.
This pneumatic aircraft drill utilizes a 0.9 HP motor to reach 6,000 RPM for continuous precision drilling in alloys. It incorporates fully caged gears with needle bearings and a 1/4" Jacobs industrial chuck to maintain performance under load. Furthermore, the handle includes a built-in silencing system for the exhaust and a vibration-reducing coating to assist with operator comfort.
1/4" (6.4 mm) Aircraft Drill
Features
| Model | UT8894 |
| Motor | 0.9 HP |
| Gear Ratio | 0.127094907407407 |
| Speed | 6000 RPM |
| Exhaust | Handle |
| Chuck | 1/4" (6.4 mm) |
| Weight | 2.0 lbs (0.9 kg). |
| Length | 7.6" (19.3 cm) |
| Rec. Pressure | 90 PSI-6.2 bar |
| Air Inlet (NPT) | 1/4" (6.4 mm) |
| Rec. Hose (I.D. In.) | 3/8" (9.5 mm) |
| Air Cons (cfm) | 18.4 |
| Average Air Cons (cfm) | 4.6 |
| Best for | Continuous high speed precision drilling in alloys |
| Model | UT8894 |
| Motor | 0.9 HP |
| Gear Ratio | 0.127094907407407 |
| Speed | 6000 RPM |
| Exhaust | Handle |
| Chuck | 1/4" (6.4 mm) |
| Weight | 2.0 lbs (0.9 kg). |
| Length | 7.6" (19.3 cm) |
| Rec. Pressure | 90 PSI-6.2 bar |
| Air Inlet (NPT) | 1/4" (6.4 mm) |
| Rec. Hose (I.D. In.) | 3/8" (9.5 mm) |
| Air Cons (cfm) | 18.4 |
| Average Air Cons (cfm) | 4.6 |
| Best for | Continuous high speed precision drilling in alloys |
