"Our job is helping you do your job"
The Trend Network R151010 NaviTEK IE is a tester for commissioning, preventative maintenance, and troubleshooting of PROFINET Industrial Ethernet networks as well as standard Ethernet IP networks. The NaviTEK IE Profinet Tester determines configurations of networks and devices as well as possible fault locations and wiring diagrams. The Network R151010 NaviTEK IE checks the status of the network with traffic light colors and displays all node parameters of the network, such as IP address, vendor, and software version.
The Trend Network R151010 NaviTEK IE is a tester for commissioning, preventative maintenance, and troubleshooting of PROFINET Industrial Ethernet networks as well as standard Ethernet IP networks. The NaviTEK IE Profinet Tester determines configurations of networks and devices as well as possible fault locations and wiring diagrams. The Network R151010 NaviTEK IE checks the status of the network with traffic light colors and displays all node parameters of the network, such as IP address, vendor, and software version.
The Trend Network R151010 NaviTEK IE is a tester for commissioning, preventative maintenance, and troubleshooting of PROFINET Industrial Ethernet networks as well as standard Ethernet IP networks. The NaviTEK IE PROFINET Tester determines configurations of networks and devices as well as possible fault locations and wiring diagrams. The Network R151010 NaviTEK IE checks the status of the network with traffic light colors and displays all node parameters of the network, such as IP address, vendor, and software version. OverviewThe NETMAP comparison tool on the NaviTEK Industrial Ethernet Network and Cable Tester can also scan the entire network to identify all active devices and save this for comparison to future NETMAPS. This scan enables easy identification of new or removed network devices, incorrectly configured devices, or configuration changes, such as those caused by automatic firmware updates. Technicians testing fiber data cabling can use an optional SFP module to test different wavelengths, measure the optical RX power received, and discover cable faults such as dirty connectors, breaks, or bends that exceed specification limits.
The NaviTEK IE kit includes RJ45 and M12 for copper cabling testing and displays the correct wiring colors for the protocol used, measures the cable length, and determines where and what the cable fault is, including split pairs, opens, shorts, and miswires. Additional troubleshooting features include a quick and easy discovery of incorrect device names, duplicate IP addresses, network latency issues, packet loss, and the ability to display and validate network node details quickly. The handy event log feature also helps to find intermittent issues by recording all network errors over a 48-hour period to determine whether the issue lies with the cabling, node, PLC, or network configuration. To prove the network has been commissioned successfully, the NaviTEK IE also provides professional PDF or CSV reports that can be customized and shared with colleagues and clients using the free TREND AnyWareO mobile app. In addition, the Trend NaviTEK IE PROFINET Tester supports comprehensive test and diagnostic functions such as IPv4, IPv6, PoE/PoE+ detection, ping and traceroute test, DHCP client, HUB blink, switch detection 10/100/1000 Mbps, tone generator, network scanner display, port identification with EDP/CDP/LLDP protocols.
Features
Applications
