Testo 0572 1912 Offers

Qualifying a thermal process means placing a sensor exactly where the process is hardest to reach. This T2 logger carries a rigid probe 4.5" (115 mm) long, measuring -58 to 284°F (-50 to 140°C) with an accuracy of ±0.18°F (±0.1°C) over most of that span.

Built for the chamber, not the bench

Hermetically sealed measuring technology sits in a stainless steel and PEEK housing rated IP68, so the logger survives repeated wet, pressurized and sub-zero cycles. At 0.79" (20 mm) across it fits recesses, packed loads and container necks that larger instruments cannot enter.

Battery changes in seconds

The threaded battery screws on by hand and changes without tools, and the logger remains fully sealed afterwards. Data is read out through the multifunction case, which programs and downloads up to eight loggers at once using testo 191 professional software for HACCP-ready documentation.

Features

• Hermetically sealed stainless steel and PEEK housing
• IP68 protection for wet, pressurized and sub-zero cycles
• 0.79" (20 mm) diameter body for tight and densely packed loads
• Tool-free threaded battery change in seconds
• 1 second to 24 hours measuring cycle
• 60,000 reading memory
• Rigid probe, 4.5" (115 mm)
• Measures -58 to 284°F (-50 to 140°C)
• Up to eight loggers programmed and read out simultaneously
• CE marked

Applications

• Pasteurization process verification in food production
• Retort and canning sterilization validation
• Bottle and can in-product temperature monitoring
• HACCP food safety documentation