Teledyne LeCroy T3DSO2304 Offers

A high speed display technology that provides excellent signal clarity, fidelity and performance with a low system noise floor. It comes with a minimum vertical input range of 1 mV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 500,000 waveforms/sec (sequence mode). It also employs a 256-level intensity grading display function and a color temperature display mode which complement the high speed update rate. It offers and supports multiple powerful triggering modes including serial bus triggering.

Features

• Four channel with a bandwidth of 300 MHz
• Incorporates two 2 GSa/s ADCs and two 140 Mpts memory modules
• When all channels are enabled, each channel has sample rate of 1 GSa/s and a standard record length of 70 Mpts, and when only a single channel per ADC is active, the maximum sample rate is 2 GSa/s and the maximum record length is 140 Mpts
• High speed display technology:
  • Waveform capture rate up to 140,000 wfm/s (normal mode), and 500,000 wfm/s (sequence mode)
  • Supports 256-level intensity grading and color display modes Record length up to 140 Mpts
  • Digital trigger system
• Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval
• Time out (Dropout), Pattern and Video
• Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART, RS232, CAN, LIN
• Video trigger, supports HDTV
• Low background noise with voltage scales from 1 mV/div to 10 V/div
• 10 different one-button operation keys: Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
• Segmented acquisition (Sequence) mode, divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event
• 8" (20.3 cm) TFT-LC D display with 800 x 480 resolution
• History waveform record (History) function, maximum recorded waveform length is 80,000 frames
• Automatic measurement function for 37 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions
• 8 Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
• High Speed hardware based Pass/Fail function
• Multiple interface types: USB Host, USB Device (USB-TMC), LAN, Trigger Out
• Supports SCPI remote control commands
• Supports Multi-language display and embedded online help
• Waveform Sequence Recorder – record and play back up to 80,000 waveforms

Functions and Characteristics

A Wide Range Of Trigger Functions

A wide rage of powerful triggering functions including Edge, Slope, Pulse, Video, Window, Runt, Interval, Dropout, Pattern, etc, allows users to debug complex hardware issues with ease.

256-level Intensity Grading and Color Temperature Display

256-level intensity graded waveform display is ideal for viewing modulated and changing waveforms. The Color temperature display clearly shows noise and jitter with infrequently occurring waveforms shown in blue through to the most frequently occurring waveforms shown in red.

Record Length of up to 140 Mpts

The record length of up to 140 Mpts allows use of a higher sampling rate to capture more signal detail. The hardware-based Zoom then allows quick zoom in to any area of interest.

Waveform Capture Rate up to 500,000 wfm/s

With a waveform capture rate of up to 500,000 wfm/s (sequence mode) and 140,000 wfm/s (standard mode) it can easily capture glitches, infrequent anomalies and other low-probability events.

History Mode

The always enabled History mode records up to 80,000 waveforms allowing users to scroll back through previous acquisitions to observe past events and locate anomalies quickly.

Sequence Mode

Segmented memory mode can store up to 80,000 waveforms into memory segments for capturing fast pulses in quick succession. Combine Sequence Mode with advanced triggers to isolate rare events. All the segments can be play back using the History function.

Comprehensive Statistical Functions

Parametric statistical data for 5 parameters can be displayed simultaneously. The statistical measurements include: Current Value, Mean Value, Minimum Value, Maximum Value, Standard Deviation, and the measurement count.

Advanced Math Function

The standard Math operations include Plus, Minus, Multiply, Divide, FFT, integration, differential, and square root for quick insight into waveform characteristics.

Eres Mode

Enhanced Resolution (Eres) mode reveals hidden waveform detail by using a linear average filter to reduce waveform noise, even on single acquisition waveforms.

Complete Connectivity

Connectivity includes External Trigger Input, Pass/Fail and Trigger Out, USB Device (USBTMC) and LAN (VXI-11) for remote control, and a Kensington Lock security point.