"Our job is helping you do your job"
The right Power Rail Probe that meets the specific requirements of those who need to acquire a low-voltage DC signal as part of testing digital power management components such as power management IC (PMIC), voltage regulator module (VMR), point-of-load (POL) switching regulator, or low-dropout regulator and also who needs complete embedded systems containing digital power management components.
The right Power Rail Probe that meets the specific requirements of those who need to acquire a low-voltage DC signal as part of testing digital power management components such as power management IC (PMIC), voltage regulator module (VMR), point-of-load (POL) switching regulator, or low-dropout regulator and also who needs complete embedded systems containing digital power management components.
Discontinued!
This product has been discontinued and is no longer available.
There is no direct replacement, however we recommend the:
Not what you're looking for? Let’s do a search and help you find what you need.
The RP4030 is designed specifically to probe a 50Ω DC power/voltage rail. The probe has large built-in offset, low attenuation (noise), and high DC input impedance. Built-in offset and low attenuation permit the power/voltage rail to be offset in the oscilloscope by its mean DC voltage with high oscilloscope gain (sensitivity) to achieve a noise-free view of small signal variations. The high DC input impedance eliminates loading of the DC rail.
Features
| Offset Range | ±30V |
| Noise | ~5% additive to oscilloscope noise (when used with HD4096 oscilloscope) |
| Rise Time (10 to 90%) | 110 ps (typical, MCX receptacle or solder-in lead) |
| Bandwidth | 4 GHz (guaranteed, MCX receptacle) 4 GHz (typical, solder-in lead) 3 GHz (typical, U.FL cable + receptacle) 350 MHz (typical, browser) |
| Input Capacitance | 0.1 μF (in series with 50 Ω) |
| Attenuation | 1.2 x |
| Input Dynamic Range | ±800 mV |
| Non-Destruct Voltage | ±50 V |
| DC Input Resistance (Nominal) | 50 kΩ |
Click on a category to view a selection of compatible accessories with the Teledyne LeCroy RP4030 Power/Voltage Rail Probe.
| Offset Range | ±30V |
| Noise | ~5% additive to oscilloscope noise (when used with HD4096 oscilloscope) |
| Rise Time (10 to 90%) | 110 ps (typical, MCX receptacle or solder-in lead) |
| Bandwidth | 4 GHz (guaranteed, MCX receptacle) 4 GHz (typical, solder-in lead) 3 GHz (typical, U.FL cable + receptacle) 350 MHz (typical, browser) |
| Input Capacitance | 0.1 μF (in series with 50 Ω) |
| Attenuation | 1.2 x |
| Input Dynamic Range | ±800 mV |
| Non-Destruct Voltage | ±50 V |
| DC Input Resistance (Nominal) | 50 kΩ |
Click on a category to view a selection of compatible accessories with the Teledyne LeCroy RP4030 Power/Voltage Rail Probe.
