"Our job is helping you do your job"
Two independent amplifiers packaged in one housing with one line power input connection. The housing is intended for desk top use, where it can be placed under an oscilloscope.
Two independent amplifiers packaged in one housing with one line power input connection. The housing is intended for desk top use, where it can be placed under an oscilloscope.
Discontinued!
This product has been discontinued and is no longer available. There are no replacement options.
We can help you find what you need:
A stand-alone high performance 100 MHz differential amplifier. Intended to act as signal conditioning preamplifier for Oscilloscopes, Spectrum Analyzers and other instruments, providing differential measurement capability to instruments having only a single-ended input.
When used with this amplifier, high quality oscilloscopes can obtain common mode rejection and overdrive recovery performance that was previously unobtainable in any product. When used with a Teledyne LeCroy oscilloscope equipped with ProBus interface, this amplifier can be controlled through the oscilloscope user interface or remote commands. When used with non ProBus oscilloscopes, this amplifier settings can be controlled directly through the front panel controls.
| Input Configuration | True Differential, + and - Inputs Precision Voltage Generator can be selected as - input source in VCOMP mode |
| Offset Capability | The Precision Voltage Generator can be used to provide true differential offset |
| +Input Coupling Selections | AC, Off (Precharge), DC |
| -Input Coupling Selection | AC, Off (Precharge), DC, VCOMP |
| Input Connectors | BNC (+Input incorporates Probe Attenuation Coding sensing connector) |
| Maximum Input Voltage | Withstand up to ±200 Vp continuous. Automatic input disconnect with manual reset |
| Output Configuration | Single ended, Ground referenced |
| Output Impedance | 50 Ω |
| Intended Output Load | 50 Ω |
| Output Connector | BNC |
| Amplifier Gain | X1 or X10 |
| Input Attenuation | ÷1 or ÷10 |
| Input Configuration | True Differential, + and - Inputs Precision Voltage Generator can be selected as - input source in VCOMP mode |
| Offset Capability | The Precision Voltage Generator can be used to provide true differential offset |
| +Input Coupling Selections | AC, Off (Precharge), DC |
| -Input Coupling Selection | AC, Off (Precharge), DC, VCOMP |
| Input Connectors | BNC (+Input incorporates Probe Attenuation Coding sensing connector) |
| Maximum Input Voltage | Withstand up to ±200 Vp continuous. Automatic input disconnect with manual reset |
| Output Configuration | Single ended, Ground referenced |
| Output Impedance | 50 Ω |
| Intended Output Load | 50 Ω |
| Output Connector | BNC |
| Amplifier Gain | X1 or X10 |
| Input Attenuation | ÷1 or ÷10 |
