"Our job is helping you do your job"
Versatile and microprocessor-controlled, this powerful fixed system controller is simple to install and operate. Compatible with sensors directly for LEL level combustibles, oxygen, hydrogen sulfide, or carbon monoxide, this controller works with any 4 to 20 mA transmitter (two- or three-wire, 24 V DC).
Versatile and microprocessor-controlled, this powerful fixed system controller is simple to install and operate. Compatible with sensors directly for LEL level combustibles, oxygen, hydrogen sulfide, or carbon monoxide, this controller works with any 4 to 20 mA transmitter (two- or three-wire, 24 V DC).
Sensors can be mounted directly at the controller housing or can be wired remote from the controller. In addition, the 10 A rated relay contacts allow direct control of external alarms and horns and the digital display has backlighting and simultaneous readout of the gas type and concentration.
Versatile and microprocessor-controlled, this powerful fixed system controller is simple to install and operate. Compatible with sensors directly for LEL level combustibles, oxygen, hydrogen sulfide, or carbon monoxide, this controller works with any 4 to 20 mA transmitter (two- or three-wire, 24 V DC).
Moreover, this system controller is also housed in a NEMA 4X rated case for a weather tight seal that complies with lock out/tag out standards and can be fully secured. Silence the alarm from outside of the controller housing with the external reset switch.
Features
Applications
| Input | |
| Direct Wired Sensors | LEL, Oxygen, Carbon Dioxide, and toxic gas sensors Amplifier not required for less than 500' (152.4 m) |
| 4 to 20 mA Sensors | Accepts any 4 to 20 mA transmitter (24 V DC, 2 or 3 wire) A wide variety of sensors are available with 4 to 20 mA signals Wiring distances up to 8000' (2438.4 m) |
| Sampling Methods | Diffusion and sample draw heads available |
| Outputs | |
| Relays | Three relays - 10 A rating (at 115 V AC), SPDT isolated contacts Two relays for gas alarms and 1 trouble relay Relays fully programmable for increasing or decreasing alarm, latching or self reset, normally energized or normally de-energized, time delay for alarm on and alarm off Relay contacts rated for 10 A at 115/220 V resistive or 10 A at 30 V resistive |
| 4 to 20 mA | Signal output, 4 to 20 mA (maximum load impedance 500 ω), per channel |
| 24 V DC | 24 V DC (400 mA maximum) output provided to operate sample drawing adapters or other accessories |
| Display | 2 x 8 Alphanumeric display with backlighting |
| Audible | Built-in audible alarm, 94 dB, mounted on enclosure Coded output: Pulsing = gas alarm; Steady = fail |
| Visual | 3 LED’s on the front cover for alarm status indication, and malfunction |
| General Specifications | |
| Enclosure | Wall mounting grey polycarbonate with hinged cover Rating: NEMA-4X enclosure, chemical, and weather resistant (suitable for indoor and outdoor installations) Construction (housing): Fiberglass/polyester with lexan window (NEMA 4X) |
| Wiring Termination | Screw type terminal block 14 gauge maximum |
| Power | Universal 115 V AC and 220 V AC, or 24 V DC nominal, battery backup option available |
| Controls | 3 internal push buttons for setup, programming, and calibration 1 external push button for alarm reset |
| Temperature | Operating: -4 to 122°F (-20 to 50°C) Storage: -4 to 158°F (-20 to 70°C) |
| Environmental Conditions | For indoor or outdoor locations (Type 4X) -4 to 122°F (-20 to 50°C) ambient Maximum relative humidity of 80% Main supply voltage fluctuations not exceeding ±10% of nominal DC supply voltage fluctuations not exceeding ±10% of nominal Overvoltage Category II, Pollution °2 |
| User Controls | Three push button control switches One ON/OFF toggle switch One push button reset switch |
| Approvals | CSA Certified to CSA C22.2 No. 61010-1-04 and UL 61010-1 |
| Dimensions | 7 x 8.5 x 4.3 (178 x 216 x 109 mm) |
| Weight | 4.2 lbs (1.9 kg) |
Click on a category to view a selection of compatible accessories with the RKI Beacon 110 Series Single Channel Wall Mount Controller, 24 V DC.
| Input | |
| Direct Wired Sensors | LEL, Oxygen, Carbon Dioxide, and toxic gas sensors Amplifier not required for less than 500' (152.4 m) |
| 4 to 20 mA Sensors | Accepts any 4 to 20 mA transmitter (24 V DC, 2 or 3 wire) A wide variety of sensors are available with 4 to 20 mA signals Wiring distances up to 8000' (2438.4 m) |
| Sampling Methods | Diffusion and sample draw heads available |
| Outputs | |
| Relays | Three relays - 10 A rating (at 115 V AC), SPDT isolated contacts Two relays for gas alarms and 1 trouble relay Relays fully programmable for increasing or decreasing alarm, latching or self reset, normally energized or normally de-energized, time delay for alarm on and alarm off Relay contacts rated for 10 A at 115/220 V resistive or 10 A at 30 V resistive |
| 4 to 20 mA | Signal output, 4 to 20 mA (maximum load impedance 500 ω), per channel |
| 24 V DC | 24 V DC (400 mA maximum) output provided to operate sample drawing adapters or other accessories |
| Display | 2 x 8 Alphanumeric display with backlighting |
| Audible | Built-in audible alarm, 94 dB, mounted on enclosure Coded output: Pulsing = gas alarm; Steady = fail |
| Visual | 3 LED’s on the front cover for alarm status indication, and malfunction |
| General Specifications | |
| Enclosure | Wall mounting grey polycarbonate with hinged cover Rating: NEMA-4X enclosure, chemical, and weather resistant (suitable for indoor and outdoor installations) Construction (housing): Fiberglass/polyester with lexan window (NEMA 4X) |
| Wiring Termination | Screw type terminal block 14 gauge maximum |
| Power | Universal 115 V AC and 220 V AC, or 24 V DC nominal, battery backup option available |
| Controls | 3 internal push buttons for setup, programming, and calibration 1 external push button for alarm reset |
| Temperature | Operating: -4 to 122°F (-20 to 50°C) Storage: -4 to 158°F (-20 to 70°C) |
| Environmental Conditions | For indoor or outdoor locations (Type 4X) -4 to 122°F (-20 to 50°C) ambient Maximum relative humidity of 80% Main supply voltage fluctuations not exceeding ±10% of nominal DC supply voltage fluctuations not exceeding ±10% of nominal Overvoltage Category II, Pollution °2 |
| User Controls | Three push button control switches One ON/OFF toggle switch One push button reset switch |
| Approvals | CSA Certified to CSA C22.2 No. 61010-1-04 and UL 61010-1 |
| Dimensions | 7 x 8.5 x 4.3 (178 x 216 x 109 mm) |
| Weight | 4.2 lbs (1.9 kg) |
Click on a category to view a selection of compatible accessories with the RKI Beacon 110 Series Single Channel Wall Mount Controller, 24 V DC.
.svg)
