RAE Systems 10-103-05 Colorimetric Hydrogen Sulfide Gas Detection Tubes, 0.2 to 3 ppm with desiccant, 10-pack

Downloads: datasheet

On-the-spot, compound-specific measurement of gases and vapors. Wide assortment of tubes available to detect over 300 gases and vapors.

Features

Easy to read, providing a sharp, clear colour change directly corresponding to the concentration of gas present
No calibration or other maintenance required
Wide assortment of tubes available to detect over 300 gases and vapors
Springless piston design accurately draws 50 and 100 cc volumes
Compatible with LP-1200 piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements
Tight vacuum seal is formed by a greased plunger gasket
Tapered rubber inlet accommodates a range of tube diameters for different types of tubes
Inlet filter prevents glass pieces and dust from entering the shaft
End-of-flow indicator in the handle turns white when the gas sampling is complete
Pump stroke counter is rotated to keep track of the number of strokes completed
Using the standard number of pump strokes, the concentration of the gas is read from stain length directly matched to the printed scale after the listed sampling time has elapsed

Gas Measured	Hydrogen Sulfide
Range	0.2 - 3 ppm w/ desiccant

RAE Systems 10-103-05 Colorimetric Hydrogen Sulfide Gas Detection Tubes, 0.2 to 3 ppm with desiccant, 10-pack

datasheet for the RAE Systems 10-103-05 Colorimetric Hydrogen Sulfide Gas Detection Tubes, 0.2 to 3 ppm with desiccant, 10-pack

Features

Easy to read, providing a sharp, clear colour change directly corresponding to the concentration of gas present
No calibration or other maintenance required
Wide assortment of tubes available to detect over 300 gases and vapors
Springless piston design accurately draws 50 and 100 cc volumes
Compatible with LP-1200 piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements
Tight vacuum seal is formed by a greased plunger gasket
Tapered rubber inlet accommodates a range of tube diameters for different types of tubes
Inlet filter prevents glass pieces and dust from entering the shaft
End-of-flow indicator in the handle turns white when the gas sampling is complete
Pump stroke counter is rotated to keep track of the number of strokes completed
Using the standard number of pump strokes, the concentration of the gas is read from stain length directly matched to the printed scale after the listed sampling time has elapsed

Gas Measured	Hydrogen Sulfide
Range	0.2 - 3 ppm w/ desiccant

RAE Systems 10-103-05 Colorimetric Hydrogen Sulfide Gas Detection Tubes, 0.2 to 3 ppm with desiccant, 10-pack

datasheet for the RAE Systems 10-103-05 Colorimetric Hydrogen Sulfide Gas Detection Tubes, 0.2 to 3 ppm with desiccant, 10-pack