"Our job is helping you do your job"
A 3/8" (9.5 mm) drive dial torque wrench that measures from 60 to 300 in-lbs in 5 in-lb increments with 2% accuracy in both clockwise and counterclockwise directions. The patented torsion bar design connects the square drive directly to the dial, which allows for precise readings unaffected by hand-hold position. This 9-29/32" (251.6 mm) tool also incorporates a tapered nose to provide clearance in areas where operating space is limited.
A 3/8" (9.5 mm) drive dial torque wrench that measures from 60 to 300 in-lbs in 5 in-lb increments with 2% accuracy in both clockwise and counterclockwise directions. The patented torsion bar design connects the square drive directly to the dial, which allows for precise readings unaffected by hand-hold position. This 9-29/32" (251.6 mm) tool also incorporates a tapered nose to provide clearance in areas where operating space is limited.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Features
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Overall Length | 9-29/32" (252 mm) |
| Drive Type | 3/8" (9.5 mm) Square |
| Torque Range | 60 to 300 in-lbs |
| Increments | 5 in-lbs |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Overall Length | 9-29/32" (252 mm) |
| Drive Type | 3/8" (9.5 mm) Square |
| Torque Range | 60 to 300 in-lbs |
| Increments | 5 in-lbs |
