Onset HOBO T-ASH-G2-500 Ashcroft Gauge Pressure Sensor, 500 psig

Model: T-ASH-G2-500

Downloads: datasheet

Onset HOBO T-ASH-G2-500 Ashcroft Gauge Pressure Sensor, 500 psig

Model: T-ASH-G2-500

Provides precision pressure measurements in compressed air systems, water, or other compatible gases and fluids up to 500 psig. Requires S-FS-CVIA FlexSmart Analog Module.

Your Price	$285.00 USD
Availability	2 to 3 Weeks
Quantity	Quantity

Onset HOBO T-ASH-G2-500 Offers

For use with HOBO® H22, U12, U30, UX120-006M, and RX3000 data loggers and HOBO ZW data nodes.

Features

High-performance pressure transducer for industrial applications
1/4" NPT stainless-steel pressure connection

Onset HOBO T-ASH-G2-500 Specifications

Measurement Range in Soil	500 psig
Compensated Temp Range	-40 to 125°C (-40 to 257°F)
Accuracy	±1% FS from -20 to 85°C (-4 to 185°F) ±1.5% FS -40 to -20°C and 85 to 125°C (-40 to -4°F and 185 to 257°F)
Non-Linearity	Less Than ±0.1% of Span Typical
Non-Repeatability	Less Than ±0.03% of Span Typical
Hysteresis	Less Than ±0.01 of Span Typical
Stability	Less Than ±0.25% of Span/Year
Durability	Tested to 50 Million Cycles
Overpressure	200% FS
Response Time	Less Than 1 msec
Power	9 to 36 VDC, 5mA
Operating Temperature	-40 to 125°C (-40 to 257°F)
Operating Humidity Range	0 to 100% RH, No Effect
Output Signal to FlexSmart Module	0 to 5 VDC, 3 Wire
Insulation Breakdown Voltage	100 VAC

Click here for complete specifications on the Onset HOBO T-ASH-G2-500

What's included with the Onset HOBO T-ASH-G2-500

Onset HOBO T-ASH-G2-500 Ashcroft Gauge Pressure Sensor, 500 psig

datasheet for the Onset HOBO T-ASH-G2-500 Ashcroft Gauge Pressure Sensor, 500 psig

Click on a category to view a selection of compatible accessories with the Onset HOBO T-ASH-G2-500 Ashcroft Gauge Pressure Sensor, 500 psig.

Module

Onset HOBO S-FS-CVIA FlexSmart Analog Input Module, 12-bit S-FS-CVIA

For use with the H22-001 Energy Logger. Handles two single-ended input channels with user-configurable ranges of 0 to 20 mADC or 0 to 20 VDC which is suitable for 2.5-, 5-, and 10-volt sensors.

Description ➕➖