"Our job is helping you do your job"
This thermocouple welder makes quality beaded thermocouples from 18 to 40 AWG wire at 0 to 60 Joules. It welds wires up to 0.043" (1.1 mm) at 5 to 10 welds per minute on 120/220 V AC. It suits sensor manufacturing and laboratory thermocouple fabrication.
This thermocouple welder makes quality beaded thermocouples from 18 to 40 AWG wire at 0 to 60 Joules. It welds wires up to 0.043" (1.1 mm) at 5 to 10 welds per minute on 120/220 V AC. It suits sensor manufacturing and laboratory thermocouple fabrication.
The TL-WELD makes quality beaded thermocouples. It is designed for sensor manufacturers who produce commercial-grade thermocouple junctions, and for users of large numbers of exposed junction thermocouples, such as test and development laboratories.
Features
Applications
| Series | TL-WELD |
| Type | thermocouple welder |
| Type | Thermocouple and fine wire welder |
| Wire gauge range | 18 to 40 AWG |
| Weld energy | 0 to 60 Joules |
| Weld rate | 5 to 10 welds per minute |
| Maximum wire diameter | 0.043" (1.1 mm) |
| Power | 120/220 V AC selectable |
| Included | Wire-holding pliers, safety glasses, magnifying eyeglass, carbon electrodes, spare 2 A fuse, argon hose, power cord, footswitch |
| Energy Output | 0 to 60 joules |
| Welding Capacity | Wires up to 0.043" (1.1 mm) in diameter |
| Duty Cycle | Minimum 5 to 10 welds/minute |
| Gas shield | Argon gas shield facility; a momentary purge is automatically triggered immediately prior to the weld to give optimum weld integrity (a satisfactory junction is produced without using argon) |
| Power Supply | Standard: 110 to 120/220 to 250 V AC selectable, 50 to 60 Hz |
| Power Consumption | Maximum 170 VA dropping to 20 VA during charging |
| Dimensions | 220 W x 120 H x 9.84" (250 mm) D (8.7 x 4.7 x 9.9" (22.1 x 11.9 x 25.1 cm)) |
| Weight | 8.8 lb (4 kg) |
| Series | TL-WELD |
| Type | thermocouple welder |
| Type | Thermocouple and fine wire welder |
| Wire gauge range | 18 to 40 AWG |
| Weld energy | 0 to 60 Joules |
| Weld rate | 5 to 10 welds per minute |
| Maximum wire diameter | 0.043" (1.1 mm) |
| Power | 120/220 V AC selectable |
| Included | Wire-holding pliers, safety glasses, magnifying eyeglass, carbon electrodes, spare 2 A fuse, argon hose, power cord, footswitch |
| Energy Output | 0 to 60 joules |
| Welding Capacity | Wires up to 0.043" (1.1 mm) in diameter |
| Duty Cycle | Minimum 5 to 10 welds/minute |
| Gas shield | Argon gas shield facility; a momentary purge is automatically triggered immediately prior to the weld to give optimum weld integrity (a satisfactory junction is produced without using argon) |
| Power Supply | Standard: 110 to 120/220 to 250 V AC selectable, 50 to 60 Hz |
| Power Consumption | Maximum 170 VA dropping to 20 VA during charging |
| Dimensions | 220 W x 120 H x 9.84" (250 mm) D (8.7 x 4.7 x 9.9" (22.1 x 11.9 x 25.1 cm)) |
| Weight | 8.8 lb (4 kg) |
