"Our job is helping you do your job"
Image is for reference only, refer to product info for complete details.
Made for laboratory glassware heating, this heater tape provides 209 W at 120 V. It has a 4.3 W/in2 watt density and a Silicone Rubber sheath. It is used for tubing heating.
Made for laboratory glassware heating, this heater tape provides 209 W at 120 V. It has a 4.3 W/in2 watt density and a Silicone Rubber sheath. It is used for tubing heating.
OMEGALUX silicone rubber extruded heating tapes are low-watt density electrical resistance heaters designed for temperature maintenance, with uniform heat distribution and an integrally molded separable plug.
Features
Applications
| Series | SRT Series |
| Type | Heater Tape |
| Voltage | 120 V |
| Power | 209 W |
| Watt density | 4.3 W/in2 |
| Maximum temperature | 450°F (232°C) |
| Sheath / material | Silicone Rubber |
| Termination | 2-Prong |
| Insulation | Silicone rubber sheath |
| Dielectric strength | In excess of 2000 V |
| Lead wires | 16 AWG high-temperature 600 V silicone rubber insulated |
| Maximum exposure Temperature | up to 446°F (230°C) |
| Heat distribution | Uniform Heat Distribution |
| Resistance | Moisture and Chemical Resistant |
| Plug | Integrally molded Separable plug |
| Heating elements | 36-40 gauge finely stranded resistance wire |
| Heating elements insulation | Double braided fiberglass yarn |
| Sheath | Encapsulated in a void-free silicone rubber sheath |
| Leads same end option | To order heaters with power leads exiting the same end of the tape, add suffix "-LSE" to model number |
| 240 V version | To order 240 V version change the "1" (2.5 cm) before the "-" in model number to "2" (5.1 cm). All 240 V versions are supplied without plugs. |
| Dimensions | 1" (2.5 cm) x 4' (1.2 m) L |
| Series | SRT Series |
| Type | Heater Tape |
| Voltage | 120 V |
| Power | 209 W |
| Watt density | 4.3 W/in2 |
| Maximum temperature | 450°F (232°C) |
| Sheath / material | Silicone Rubber |
| Termination | 2-Prong |
| Insulation | Silicone rubber sheath |
| Dielectric strength | In excess of 2000 V |
| Lead wires | 16 AWG high-temperature 600 V silicone rubber insulated |
| Maximum exposure Temperature | up to 446°F (230°C) |
| Heat distribution | Uniform Heat Distribution |
| Resistance | Moisture and Chemical Resistant |
| Plug | Integrally molded Separable plug |
| Heating elements | 36-40 gauge finely stranded resistance wire |
| Heating elements insulation | Double braided fiberglass yarn |
| Sheath | Encapsulated in a void-free silicone rubber sheath |
| Leads same end option | To order heaters with power leads exiting the same end of the tape, add suffix "-LSE" to model number |
| 240 V version | To order 240 V version change the "1" (2.5 cm) before the "-" in model number to "2" (5.1 cm). All 240 V versions are supplied without plugs. |
| Dimensions | 1" (2.5 cm) x 4' (1.2 m) L |
