"Our job is helping you do your job"
Built for flexible surface heating, this rectangular silicone rubber heater supplies 38 W at 2.5 W/in² on 120 V AC rated for -60 to 450°F (-51 to 232°C) service. Furthermore, it measures 5 x 3" with a 0.125" profile. It suits freeze protection, pipe heating and process temperature maintenance.
Built for flexible surface heating, this rectangular silicone rubber heater supplies 38 W at 2.5 W/in² on 120 V AC rated for -60 to 450°F (-51 to 232°C) service. Furthermore, it measures 5 x 3" with a 0.125" profile. It suits freeze protection, pipe heating and process temperature maintenance.
Applications
| Heating element design | Etched foil where length or width dimension is less than 10" (254 mm); all other heaters wire wound |
| Heater Type | Silicone rubber flexible heater |
| Maximum operating temperature | Without Pressure Sensitive Adhesive (PSA): 450°F (232°C); with PSA: 250°F (120°C) |
| Shape | Rectangular |
| Voltage | 115 V |
| Length | 5" (12.7 cm) |
| Watt density | 2.5, 5 or 10 watts/in² |
| Width | 3" (7.6 cm) |
| Wattage | 5 to 1440 watts |
| Thickness | 0.125" (3.17 mm) |
| Pressure Sensitive Adhesive (PSA) | Optional, not available at 10 watts/in² watt density |
| Power | 38 W |
| Lead wire | 12" (305 mm), UL1180 PTFE insulated |
| Watt Density | 2.5 W/in² |
| Dielectric strength | 1250 VAC |
| Voltage | 120 V AC |
| Minimum bending radius | 2.00" typical |
| Service Temperature | -60 to 450°F (-51 to 232°C) |
| Dimensions | Heater thickness: 0.040", except at lead wire exit (thickness varies with heater) |
| Heating element design | Etched foil where length or width dimension is less than 10" (254 mm); all other heaters wire wound |
| Heater Type | Silicone rubber flexible heater |
| Maximum operating temperature | Without Pressure Sensitive Adhesive (PSA): 450°F (232°C); with PSA: 250°F (120°C) |
| Shape | Rectangular |
| Voltage | 115 V |
| Length | 5" (12.7 cm) |
| Watt density | 2.5, 5 or 10 watts/in² |
| Width | 3" (7.6 cm) |
| Wattage | 5 to 1440 watts |
| Thickness | 0.125" (3.17 mm) |
| Pressure Sensitive Adhesive (PSA) | Optional, not available at 10 watts/in² watt density |
| Power | 38 W |
| Lead wire | 12" (305 mm), UL1180 PTFE insulated |
| Watt Density | 2.5 W/in² |
| Dielectric strength | 1250 VAC |
| Voltage | 120 V AC |
| Minimum bending radius | 2.00" typical |
| Service Temperature | -60 to 450°F (-51 to 232°C) |
| Dimensions | Heater thickness: 0.040", except at lead wire exit (thickness varies with heater) |
