"Our job is helping you do your job"
Built for freeze protection, this silicone rubber heater provides 60 W at 120 V AC. It has a Fiberglass sheath and a maximum temperature of -60 to 500°F (-51 to 260°C). It also suits condensation prevention.
Built for freeze protection, this silicone rubber heater provides 60 W at 120 V AC. It has a Fiberglass sheath and a maximum temperature of -60 to 500°F (-51 to 260°C). It also suits condensation prevention.
SRMU Series silicone rubber heaters are square/rectangular heat blankets of fiberglass reinforced silicone rubber. They provide flexible surface heating and are available with or without pressure sensitive adhesive (PSA) backing.
Features
Applications
| Series | SRMU Series |
| Type | Silicone Rubber Heater |
| Voltage | 120 V AC |
| Power | 60 W |
| Maximum temperature | -60 to 500°F (-51 to 260°C) |
| Sheath / material | Fiberglass |
| Operating Voltage | 120 V AC |
| Leads | 48" (122 cm) PFA |
| Heating Element | Laminated between two layers of, 0.015 mil, fiberglass reinforced silicone rubber; bonded to an aluminum mounting plate (serpentine wound heating element laminated between two layers of 15 mil fiberglass reinforced silicone rubber) |
| Silicone Rubber Density | 16.8 oz (476.27 g)/yd2 (0.06 grams/cm2) per layer |
| Overall Thickness (blanket and bracket) | 1/4" (0.64 cm) |
| Maximum Energized Exposure Temperature | 450°F (232°C) |
| Maximum De-energized Exposure Temperature | 500°F (260°C) |
| Minimum Exposure Temperature | -60°F (-51°C) |
| Dielectric Strength | > 2000 V |
| Approvals | UR Pending |
| Mounting | Aluminum mounting plate/bracket with two 7/16" (11 mm) holes for mounting; can be mounted vertically or horizontally (optimal control when mounted vertically) |
| Mounting bracket dimension | 1" (25 mm) Diameter TYP |
| Series | SRMU Series |
| Type | Silicone Rubber Heater |
| Voltage | 120 V AC |
| Power | 60 W |
| Maximum temperature | -60 to 500°F (-51 to 260°C) |
| Sheath / material | Fiberglass |
| Operating Voltage | 120 V AC |
| Leads | 48" (122 cm) PFA |
| Heating Element | Laminated between two layers of, 0.015 mil, fiberglass reinforced silicone rubber; bonded to an aluminum mounting plate (serpentine wound heating element laminated between two layers of 15 mil fiberglass reinforced silicone rubber) |
| Silicone Rubber Density | 16.8 oz (476.27 g)/yd2 (0.06 grams/cm2) per layer |
| Overall Thickness (blanket and bracket) | 1/4" (0.64 cm) |
| Maximum Energized Exposure Temperature | 450°F (232°C) |
| Maximum De-energized Exposure Temperature | 500°F (260°C) |
| Minimum Exposure Temperature | -60°F (-51°C) |
| Dielectric Strength | > 2000 V |
| Approvals | UR Pending |
| Mounting | Aluminum mounting plate/bracket with two 7/16" (11 mm) holes for mounting; can be mounted vertically or horizontally (optimal control when mounted vertically) |
| Mounting bracket dimension | 1" (25 mm) Diameter TYP |
