"Our job is helping you do your job"
Ideal for flexible surface heating, this rectangular silicone rubber heater supplies 30 W at 10 W/in² on 120 V AC rated for -70 to 300°F (-56 to 149°C) service. Furthermore, it measures 3 x 1" with a 0.04" profile, and has a pressure-sensitive adhesive (PSA) backing for easy mounting. It suits freeze protection, pipe heating and process temperature maintenance.
Ideal for flexible surface heating, this rectangular silicone rubber heater supplies 30 W at 10 W/in² on 120 V AC rated for -70 to 300°F (-56 to 149°C) service. Furthermore, it measures 3 x 1" with a 0.04" profile, and has a pressure-sensitive adhesive (PSA) backing for easy mounting. It suits freeze protection, pipe heating and process temperature maintenance.
Silicone Rubber Fiberglass Insulated Heaters can improve heat transfer and speed warm-ups where controlled heating is required in confined areas. Two circuit designs are available: etched foil or wire wound.
Heaters with etched foil designed elements are available where the length or width dimension is less than 10" (254 mm). All other heaters where both the length and the width dimensions exceed 10" (254 mm) use the wire-wound element design.
Two general styles are covered in this manual. Round silicone rubber heaters and rectangular silicone rubber heaters.
Applications
| Heating element design | Etched foil where length or width dimension is less than 10" (254 mm); all other heaters wire wound |
| Heater Type | Silicone rubber flexible heater |
| Maximum operating temperature | Without Pressure Sensitive Adhesive (PSA): 450°F (232°C); with PSA: 250°F (120°C) |
| Shape | Rectangular |
| Voltage | 115 V |
| Length | 3" (7.6 cm) |
| Watt density | 2.5, 5 or 10 watts/in² |
| Width | 1" (2.5 cm) |
| Wattage | 5 to 1440 watts |
| Thickness | 0.04" (1.02 mm) |
| Pressure Sensitive Adhesive (PSA) | Optional, not available at 10 watts/in² watt density |
| Power | 30 W |
| Watt Density | 10 W/in² |
| Lead wire | 12" (305 mm), UL1180 PTFE insulated |
| Voltage | 120 V AC |
| Dielectric strength | 1250 VAC |
| Service Temperature | -70 to 300°F (-56 to 149°C) |
| Minimum bending radius | 2.00" typical |
| Backing | Pressure-sensitive adhesive (PSA) |
| Dimensions | Heater thickness: 0.040", except at lead wire exit (thickness varies with heater) |
| Heating element design | Etched foil where length or width dimension is less than 10" (254 mm); all other heaters wire wound |
| Heater Type | Silicone rubber flexible heater |
| Maximum operating temperature | Without Pressure Sensitive Adhesive (PSA): 450°F (232°C); with PSA: 250°F (120°C) |
| Shape | Rectangular |
| Voltage | 115 V |
| Length | 3" (7.6 cm) |
| Watt density | 2.5, 5 or 10 watts/in² |
| Width | 1" (2.5 cm) |
| Wattage | 5 to 1440 watts |
| Thickness | 0.04" (1.02 mm) |
| Pressure Sensitive Adhesive (PSA) | Optional, not available at 10 watts/in² watt density |
| Power | 30 W |
| Watt Density | 10 W/in² |
| Lead wire | 12" (305 mm), UL1180 PTFE insulated |
| Voltage | 120 V AC |
| Dielectric strength | 1250 VAC |
| Service Temperature | -70 to 300°F (-56 to 149°C) |
| Minimum bending radius | 2.00" typical |
| Backing | Pressure-sensitive adhesive (PSA) |
| Dimensions | Heater thickness: 0.040", except at lead wire exit (thickness varies with heater) |
