"Our job is helping you do your job"
This uniaxial linear strain gauge has a 350 Ω grid measuring 0.126 x 0.098" (3.2 x 2.5 mm) on a polyimide carrier. It operates over -103 to 203°F (-75 to 95°C) with Solder Pad. It suits measurement of stress concentration or high gradient areas and static and dynamic strain measurement.
This uniaxial linear strain gauge has a 350 Ω grid measuring 0.126 x 0.098" (3.2 x 2.5 mm) on a polyimide carrier. It operates over -103 to 203°F (-75 to 95°C) with Solder Pad. It suits measurement of stress concentration or high gradient areas and static and dynamic strain measurement.
The linear pattern strain gauges are used to measure strain in a single direction. They are used for experimental stress analysis, and transducer applications. The strain gauge pattern is shown on the left side of the table; the arrows indicate the principal stress direction.
Features
Applications
| Series | SGT Series |
| Type | uniaxial linear strain gauge |
| Gauge resistance | 350 Ω |
| Grid size | 0.126 x 0.098" (3.2 x 2.5 mm) |
| Temperature range | -103 to 203°F (-75 to 95°C) |
| Leads | Solder Pad |
| Measuring Grid Material | Constantan foil |
| Carrier Material | Polyimide film |
| Gauge Pattern | Linear uniaxial pattern |
| Nominal Resistance | 350 or 1000 Ω |
| Termination | Ribbon Leads or Solder Pads |
| Temperature Compensation | ST = Steel or AL = Aluminum |
| Maximum Permitted Bridge Energizing Voltage | Per model, 4.5 to 15 Vrms |
| Package Quantity | Pkg of 5 |
| Bondable Terminal Pad | BPT-1 / BPT-2 / BPT-3 (per size) |
Click on a category to view a selection of compatible accessories with the Omega SGT Series Uniaxial Linear Strain Gauge, 350 Ω, 0.13 x 0.10" grid, solder pad, 5-pack.
| Series | SGT Series |
| Type | uniaxial linear strain gauge |
| Gauge resistance | 350 Ω |
| Grid size | 0.126 x 0.098" (3.2 x 2.5 mm) |
| Temperature range | -103 to 203°F (-75 to 95°C) |
| Leads | Solder Pad |
| Measuring Grid Material | Constantan foil |
| Carrier Material | Polyimide film |
| Gauge Pattern | Linear uniaxial pattern |
| Nominal Resistance | 350 or 1000 Ω |
| Termination | Ribbon Leads or Solder Pads |
| Temperature Compensation | ST = Steel or AL = Aluminum |
| Maximum Permitted Bridge Energizing Voltage | Per model, 4.5 to 15 Vrms |
| Package Quantity | Pkg of 5 |
| Bondable Terminal Pad | BPT-1 / BPT-2 / BPT-3 (per size) |
Click on a category to view a selection of compatible accessories with the Omega SGT Series Uniaxial Linear Strain Gauge, 350 Ω, 0.13 x 0.10" grid, solder pad, 5-pack.
