"Our job is helping you do your job"
This shear strain gauge has a 1000 Ω grid measuring 0.13 x 0.094" (3.3 x 2.4 mm) on a polyimide carrier. It operates over -103 to 203°F (-75 to 95°C) with Solder Pad. It suits shear beam load cell construction and experimental stress analysis.
This shear strain gauge has a 1000 Ω grid measuring 0.13 x 0.094" (3.3 x 2.4 mm) on a polyimide carrier. It operates over -103 to 203°F (-75 to 95°C) with Solder Pad. It suits shear beam load cell construction and experimental stress analysis.
Transducer quality shear strain gauges for shear beam and torque applications. The dual grid shear patterns place two reversed grids on one carrier. Single strain gauges are available in matched shear/torsion pairs for use back to back in the transducer design, along the centerline of the shaft or beam.
Features
Applications
| Series | SGT Series |
| Type | shear strain gauge |
| Gauge resistance | 1000 Ω |
| Grid size | 0.13 x 0.094" (3.3 x 2.4 mm) |
| Temperature range | -103 to 203°F (-75 to 95°C) |
| Leads | Solder Pad |
| Measuring Grid Material | Constantan foil |
| Carrier Material | Polyimide film |
| Gauge Pattern | Dual grid shear pattern |
| Nominal Resistance | 350 or 1000 Ω |
| Termination | Ribbon Leads or Solder Pads |
| Temperature Compensation | ST = Steel or AL = Aluminum |
| Maximum Permitted Bridge Energizing Voltage | Per model, 5.5 to 23 Vrms |
| Package Quantity | Pkg of 5 |
| Series | SGT Series |
| Type | shear strain gauge |
| Gauge resistance | 1000 Ω |
| Grid size | 0.13 x 0.094" (3.3 x 2.4 mm) |
| Temperature range | -103 to 203°F (-75 to 95°C) |
| Leads | Solder Pad |
| Measuring Grid Material | Constantan foil |
| Carrier Material | Polyimide film |
| Gauge Pattern | Dual grid shear pattern |
| Nominal Resistance | 350 or 1000 Ω |
| Termination | Ribbon Leads or Solder Pads |
| Temperature Compensation | ST = Steel or AL = Aluminum |
| Maximum Permitted Bridge Energizing Voltage | Per model, 5.5 to 23 Vrms |
| Package Quantity | Pkg of 5 |
