"Our job is helping you do your job"
Built for paint drying, this infrared panel heater is supplied with High Temperature, Cloth-Faced, 3-Phase. It also suits wave soldering.
Built for paint drying, this infrared panel heater is supplied with High Temperature, Cloth-Faced, 3-Phase. It also suits wave soldering.
OMEGALUX QF Series heaters are very popular infrared panel heaters used in a wide variety of applications. The QF Series panel heaters' radiant surface is constructed through a patented process using bonded high temperature cloth quartz. A black coating is applied to the face of the heater for greater emissivity.
Features
Applications
| Series | QF Series |
| Type | infrared panel heater |
| Configuration | High Temperature |
| Configuration | Cloth-Faced |
| Configuration | 3-Phase |
| Configuration | 480 V |
| Configuration | 7200 W |
| Configuration | 25 W/in2 |
| Configuration | Aluminized Steel |
| Configuration | with Thermowell |
| Configuration | 24" (61 cm) L |
| Maximum Temperature Emitter Face | 1598°F (870°C) |
| Power | 120, 240, 480 V single and dual voltage, 1 phase, 3 phase and dual phase |
| Wattage | 720 to 21,600 W |
| Watt Density | 10, 15, 20, and 25 W/in2 (1.6, 2.3, 3.1, and 3.9 W/cm2) |
| Enclosure | Heavy gauge aluminized steel |
| Surface | Rugged black woven ceramic cloth for high radiant energy transfer |
| Frame | Heat resistant, heavy gauge aluminized steel |
| Output Wavelength | Between 2.5 and 6 microns |
| Heater Element | Precision iron/chrome/aluminum resistance wire, designed for uniform emission over entire heating surface and extended life |
| Heater Element Support | Grooved ceramic fiber refractory board |
| High Temperature Insulation | To minimize heat loss from the back of the heater |
| Terminals | Stainless steel, all welded construction |
| Optional Quartz Thermowell | High temperature 5/32" (4 mm) diameter 5" (127 mm) long quartz thermowell, with strain relief |
| Width | 6 to 24" (15 to 61 cm) (model dependent) |
| Length | 12 to 72" (30 to 183 cm) (model dependent) |
| Weight | 3 to 32 lb (1.4 to 14.5 kg) (model dependent) |
| Series | QF Series |
| Type | infrared panel heater |
| Configuration | High Temperature |
| Configuration | Cloth-Faced |
| Configuration | 3-Phase |
| Configuration | 480 V |
| Configuration | 7200 W |
| Configuration | 25 W/in2 |
| Configuration | Aluminized Steel |
| Configuration | with Thermowell |
| Configuration | 24" (61 cm) L |
| Maximum Temperature Emitter Face | 1598°F (870°C) |
| Power | 120, 240, 480 V single and dual voltage, 1 phase, 3 phase and dual phase |
| Wattage | 720 to 21,600 W |
| Watt Density | 10, 15, 20, and 25 W/in2 (1.6, 2.3, 3.1, and 3.9 W/cm2) |
| Enclosure | Heavy gauge aluminized steel |
| Surface | Rugged black woven ceramic cloth for high radiant energy transfer |
| Frame | Heat resistant, heavy gauge aluminized steel |
| Output Wavelength | Between 2.5 and 6 microns |
| Heater Element | Precision iron/chrome/aluminum resistance wire, designed for uniform emission over entire heating surface and extended life |
| Heater Element Support | Grooved ceramic fiber refractory board |
| High Temperature Insulation | To minimize heat loss from the back of the heater |
| Terminals | Stainless steel, all welded construction |
| Optional Quartz Thermowell | High temperature 5/32" (4 mm) diameter 5" (127 mm) long quartz thermowell, with strain relief |
| Width | 6 to 24" (15 to 61 cm) (model dependent) |
| Length | 12 to 72" (30 to 183 cm) (model dependent) |
| Weight | 3 to 32 lb (1.4 to 14.5 kg) (model dependent) |
