"Our job is helping you do your job"
Built for hydraulic pressure control, this pressure transducer measures 0 to 145 psi (0 to 10 bar) gauge pressure with a 4 to 20 mA output at ±0.25% accuracy. It also suits pneumatic measurement.
Built for hydraulic pressure control, this pressure transducer measures 0 to 145 psi (0 to 10 bar) gauge pressure with a 4 to 20 mA output at ±0.25% accuracy. It also suits pneumatic measurement.
Omega's PXM309 Series industrial pressure transducers utilize two of our precision manufacturing techniques. Low pressure ranges and absolute ranges use a precision micromachined silicon sensor protected by a stainless steel diaphragm; a thin film of oil transfers the pressure and assures accuracy and stability. Medium and high gauge pressure ranges use precision semiconductor strain gauges fused directly to the stainless steel diaphragm, yielding a rugged, durable bond that assures long-term high stability.
Features
Applications
| Series | PXM309 Series |
| Type | Metric stainless steel pressure transducer |
| Pressure type | Gauge |
| Pressure range | 0 to 145 psi (0 to 10 bar) |
| Static accuracy | ±0.25% FS BSL at 77°F (25°C) (linearity, hysteresis and repeatability) |
| Total error band | ±1% |
| Output | 4 to 20 mA (2-wire) |
| Supply voltage | 9 to 30 V DC (4 to 20 mA output) |
| Calibration | 5-point traceable certificate included |
| Long-term stability (1 year) | ±0.25% FS |
| Isolation | 1 MΩ at 25 V DC |
| Pressure cycles | 10 million full-scale cycles |
| Proof pressure | 2 x rated pressure |
| Burst pressure | 5 x rated pressure |
| Wetted parts | 17-4 PH stainless steel (models up to 508 psi (35 bar) may contain an HNBR O-ring in the wetted pressure port assembly) |
| Sensing element | Fused semiconductor strain gauge on a stainless steel diaphragm |
| Pressure connection | G 1/4 male (BSPP) |
| Electrical connection | M12 4-pin connector |
| Response time | 1 millisecond |
| Bandwidth | DC to 1 kHz (typical) |
| Shock | 50 g, 11 ms half-sine |
| Vibration | ±20 g |
| CE compliance | EN 55022/55011 Class A and B; IEC 61000 |
| Enclosure rating | IP65 |
| Compensated temperature | -4 to 185°F (-20 to 85°C) |
| Operating temperature | -40 to 185°F (-40 to 85°C) |
| Weight | Net weight: 0.33 lbs (150 g) |
| Series | PXM309 Series |
| Type | Metric stainless steel pressure transducer |
| Pressure type | Gauge |
| Pressure range | 0 to 145 psi (0 to 10 bar) |
| Static accuracy | ±0.25% FS BSL at 77°F (25°C) (linearity, hysteresis and repeatability) |
| Total error band | ±1% |
| Output | 4 to 20 mA (2-wire) |
| Supply voltage | 9 to 30 V DC (4 to 20 mA output) |
| Calibration | 5-point traceable certificate included |
| Long-term stability (1 year) | ±0.25% FS |
| Isolation | 1 MΩ at 25 V DC |
| Pressure cycles | 10 million full-scale cycles |
| Proof pressure | 2 x rated pressure |
| Burst pressure | 5 x rated pressure |
| Wetted parts | 17-4 PH stainless steel (models up to 508 psi (35 bar) may contain an HNBR O-ring in the wetted pressure port assembly) |
| Sensing element | Fused semiconductor strain gauge on a stainless steel diaphragm |
| Pressure connection | G 1/4 male (BSPP) |
| Electrical connection | M12 4-pin connector |
| Response time | 1 millisecond |
| Bandwidth | DC to 1 kHz (typical) |
| Shock | 50 g, 11 ms half-sine |
| Vibration | ±20 g |
| CE compliance | EN 55022/55011 Class A and B; IEC 61000 |
| Enclosure rating | IP65 |
| Compensated temperature | -4 to 185°F (-20 to 85°C) |
| Operating temperature | -40 to 185°F (-40 to 85°C) |
| Weight | Net weight: 0.33 lbs (150 g) |
