"Our job is helping you do your job"
Configured for T08 Transistor Case, Absolute, 0 psi (0 bar) to 15 psi (1.03 bar), this pressure transducer suits oem applications and industrial fluid pressure measurement. It has output of 30 mV ±10% @ 10 V DC.
Configured for T08 Transistor Case, Absolute, 0 psi (0 bar) to 15 psi (1.03 bar), this pressure transducer suits oem applications and industrial fluid pressure measurement. It has output of 30 mV ±10% @ 10 V DC.
OMEGA's PX4600 Series consists of accurate, highly reliable pressure transducers suitable for printed circuit board mounting. The small size and light weight of the PX4600 transducers make them ideal for tough vibration and shock environments.
The sensor is a small silicon chip with 4 diffused silicon strain gauges. Laser-trimmed resistors provide excellent temperature compensation.
Features
Applications
| Series | PX4600 Series |
| Type | pressure transducer |
| Configuration | T08 Transistor Case |
| Configuration | Absolute |
| Configuration | 0 psi (0 bar) to 15 psi (1.03 bar) |
| Accuracy | ± 0.25 % |
| Configuration | 3/16" (4.8 mm) Tube |
| Configuration | Ratiometric 3 mV/V |
| Range | -67 to 302°F (-55 to 150°C) (-67°F to 300°F) |
| Electrical Excitation | 10 V DC |
| Output | 30 mV ±10% @ 10 V DC |
| Zero Balance | 0 mV ±5% FSO |
| Input Resistance | 2000 Ω minimum |
| Output Resistance | 1000 to 1500 Ω |
| Dielectric Isolation Resistance | 100 MΩ minimum @ 50 V DC applied between the case or conductive media and the bridge circuit |
| Accuracy | ±0.25% FSO combined linearity, hysteresis, and repeatability |
| Sensing Element | 4-active-arm bridge using a micro-machined diffused silicon diaphragm sensor and thin-film media and dielectric isolation barriers |
| Temperature Sensor | Output resistance @ 75°F (24°C) 900 to 1500 Ω |
| Temperature Coefficient | 8% minimum, 10% maximum per 100°F (55.5°C) |
| Compensated Temperature | -67 to 250°F (-55 to 121°C) |
| Thermal Effects | Zero: ±0.036% FSO/°C; Span: ±0.036% FSO/°C |
| Vibration Sensitivity | At 35 g peak sinusoidal vibration from 10 Hz to 2000 Hz (1/2" (12.7 mm) D.A.), the output shall not exceed 0.04% FSO/g for 15 psi (1.03 bar) range, decreasing to 0.005% FSO/g for 100 psi (6.89 bar) and above |
| Natural Frequency | >35 kHz for 100 psi (6.9 bar) range |
| Shock | 100 g, 11 ms half sine wave without damage |
| MTBF | Typical 100,000 hours @ 131°F (55°C), fixed-wing aircraft service |
| Proof Pressure | 250% rated pressure, 500 psi (34.5 bar) maximum, will not cause changes in performance beyond specified tolerance |
| Burst Pressure | 300% rated pressure, 500 psi (34.5 bar) maximum |
| Wetted Parts | Nitride, Pyrex® glass, epoxy and Kovar® |
| Operating Temperature | -67 to 302°F (-55 to 150°C) |
| Standard Ranges | 0 to 15, 20, 50, 100, 200, 300 psi (20.68 bar) gauge and absolute pressure |
| Case | TO8 transistor case (for OEM and PC board mounting) |
| Weight | 0.2 oz (5 g) maximum |
| Series | PX4600 Series |
| Type | pressure transducer |
| Configuration | T08 Transistor Case |
| Configuration | Absolute |
| Configuration | 0 psi (0 bar) to 15 psi (1.03 bar) |
| Accuracy | ± 0.25 % |
| Configuration | 3/16" (4.8 mm) Tube |
| Configuration | Ratiometric 3 mV/V |
| Range | -67 to 302°F (-55 to 150°C) (-67°F to 300°F) |
| Electrical Excitation | 10 V DC |
| Output | 30 mV ±10% @ 10 V DC |
| Zero Balance | 0 mV ±5% FSO |
| Input Resistance | 2000 Ω minimum |
| Output Resistance | 1000 to 1500 Ω |
| Dielectric Isolation Resistance | 100 MΩ minimum @ 50 V DC applied between the case or conductive media and the bridge circuit |
| Accuracy | ±0.25% FSO combined linearity, hysteresis, and repeatability |
| Sensing Element | 4-active-arm bridge using a micro-machined diffused silicon diaphragm sensor and thin-film media and dielectric isolation barriers |
| Temperature Sensor | Output resistance @ 75°F (24°C) 900 to 1500 Ω |
| Temperature Coefficient | 8% minimum, 10% maximum per 100°F (55.5°C) |
| Compensated Temperature | -67 to 250°F (-55 to 121°C) |
| Thermal Effects | Zero: ±0.036% FSO/°C; Span: ±0.036% FSO/°C |
| Vibration Sensitivity | At 35 g peak sinusoidal vibration from 10 Hz to 2000 Hz (1/2" (12.7 mm) D.A.), the output shall not exceed 0.04% FSO/g for 15 psi (1.03 bar) range, decreasing to 0.005% FSO/g for 100 psi (6.89 bar) and above |
| Natural Frequency | >35 kHz for 100 psi (6.9 bar) range |
| Shock | 100 g, 11 ms half sine wave without damage |
| MTBF | Typical 100,000 hours @ 131°F (55°C), fixed-wing aircraft service |
| Proof Pressure | 250% rated pressure, 500 psi (34.5 bar) maximum, will not cause changes in performance beyond specified tolerance |
| Burst Pressure | 300% rated pressure, 500 psi (34.5 bar) maximum |
| Wetted Parts | Nitride, Pyrex® glass, epoxy and Kovar® |
| Operating Temperature | -67 to 302°F (-55 to 150°C) |
| Standard Ranges | 0 to 15, 20, 50, 100, 200, 300 psi (20.68 bar) gauge and absolute pressure |
| Case | TO8 transistor case (for OEM and PC board mounting) |
| Weight | 0.2 oz (5 g) maximum |
