"Our job is helping you do your job"
Used for direct surface heating, this 1 x 2" (2.5 x 5.1 cm) polyimide flexible heater delivers 10 W/in² on 28 V with all-polyimide insulation and strain relief. It ships without adhesive for clamped or bonded mounting and withstands service to 450°F (232°C).
Used for direct surface heating, this 1 x 2" (2.5 x 5.1 cm) polyimide flexible heater delivers 10 W/in² on 28 V with all-polyimide insulation and strain relief. It ships without adhesive for clamped or bonded mounting and withstands service to 450°F (232°C).
OMEGA's PLM-Series polyimide flexible heaters are offered in various shapes, wattages and voltages. All models can be supplied in self-adhesive or non-adhesive options to fit most installation needs. The polyimide insulation makes these heaters chemically resistant and flexible so they can fit on rounded surfaces with ease.
Features
Applications
| Series | PLMLV (low voltage, 28 V maximum) |
| Watt density | 10 W/in² |
| Operating temperature | -71 to 450°F (-57 to 232°C) |
| Leads | PTFE-insulated, 12" (305 mm) ±0.4" length, UL10109, 22 AWG (UL1332, 16 AWG for heaters ≥ 3 Amp) |
| Dielectric strength | 1250 V AC |
| Minimum bending radius | 0.032" (0.81 mm) |
| Maximum operating voltage | 28 V, 115 V or 230 V |
| Pressure-sensitive adhesive (PSA) | No |
| Dimensions | 1 x 2" (2.5 x 5.1 cm) Maximum thickness: 0.01" (0.25 mm); strain-relief maximum 0.08" (2.03 mm), or 0.10" (2.54 mm) for heaters ≥ 3 Amp |
| Series | PLMLV (low voltage, 28 V maximum) |
| Watt density | 10 W/in² |
| Operating temperature | -71 to 450°F (-57 to 232°C) |
| Leads | PTFE-insulated, 12" (305 mm) ±0.4" length, UL10109, 22 AWG (UL1332, 16 AWG for heaters ≥ 3 Amp) |
| Dielectric strength | 1250 V AC |
| Minimum bending radius | 0.032" (0.81 mm) |
| Maximum operating voltage | 28 V, 115 V or 230 V |
| Pressure-sensitive adhesive (PSA) | No |
| Dimensions | 1 x 2" (2.5 x 5.1 cm) Maximum thickness: 0.01" (0.25 mm); strain-relief maximum 0.08" (2.03 mm), or 0.10" (2.54 mm) for heaters ≥ 3 Amp |
