"Our job is helping you do your job"
Made for temperature measurement, this temperature sensor insulator accessory supports temperature sensor assembly and wire isolation. Moreover, it features ceramic 1-hole round - 5-pack. It suits thermocouple assembly, wire isolation, and sensor repair work.
Made for temperature measurement, this temperature sensor insulator accessory supports temperature sensor assembly and wire isolation. Moreover, it features ceramic 1-hole round - 5-pack. It suits thermocouple assembly, wire isolation, and sensor repair work.
The diameter and “out of roundness” of OMEGA’s insulators is plus or minus 5% or ±0.015", whichever is greater. The straightness is at least 1⁄32" for each six-inch length. The following table lists the maximum recommended wire diameters which should be used with six-inch sections. Closer tolerances are permissible with shorter sections, but the minimum clearance tolerance is 5% or ±0.015", whichever is greater.
OMEGATITE(R) 200 This material is recommended for most thermocouple applications. It consists of a mullite type ceramic capable of withstanding temperatures up to 3000°F (1650°C).
OMEGATITE 200 is recommended for most thermocouple applications. It consists of a mullite type ceramic capable of withstanding temperatures up to 1650°C (3000°F).
The diameter and "out of roundness" of OMEGA's insulators is plus or minus 5% or +/-0.015", whichever is greater. The straightness is at least 1/32 inch for each six-inch length.
The following table lists the maximum recommended wire diameters which should be used with six-inch sections. Closer tolerances are permissible with shorter sections, but the minimum clearance tolerance is 5% or +/-0.015", whichever is greater.
OMEGA(R) thermocouple insulators are supplied in a wide range of sizes. Sizes up to 1/4 inch O.D. are available from stock. Other sizes and lengths by quotation.
Applications
| Water absorption | 0.00 |
| Outside Diameter | 1⁄16 |
| Gas permeability | Gas Tight |
| Inside Diameter | 1⁄32 |
| Diameter and out-of-roundness tolerance | ±5% or ±0.015", whichever is greater |
| Straightness | at least 1/32" per six-inch length |
| Minimum clearance tolerance | 5% or ±0.015", whichever is greater |
| Material | OMEGATITE 200 |
| Constitution | 80% Mullite, 20% Glass |
| Specific gravity | 2.4 |
| Compressive strength | 100,000 psi |
| Tensile strength | 14,000 psi |
| Transverse strength | 20,000 psi |
| Maximum service temperature | 3000°F (1650°C) |
| Dielectric constant (1MC) | 4.95 |
| Dielectric strength | 250 volts/mil |
| Hardness (Mohs scale) | 7 |
| Fabrication method | Extrusion |
| Dimensions | 1/16" O.D. Inside diameter: 1/32" Length: 6" |
| Water absorption | 0.00 |
| Outside Diameter | 1⁄16 |
| Gas permeability | Gas Tight |
| Inside Diameter | 1⁄32 |
| Diameter and out-of-roundness tolerance | ±5% or ±0.015", whichever is greater |
| Straightness | at least 1/32" per six-inch length |
| Minimum clearance tolerance | 5% or ±0.015", whichever is greater |
| Material | OMEGATITE 200 |
| Constitution | 80% Mullite, 20% Glass |
| Specific gravity | 2.4 |
| Compressive strength | 100,000 psi |
| Tensile strength | 14,000 psi |
| Transverse strength | 20,000 psi |
| Maximum service temperature | 3000°F (1650°C) |
| Dielectric constant (1MC) | 4.95 |
| Dielectric strength | 250 volts/mil |
| Hardness (Mohs scale) | 7 |
| Fabrication method | Extrusion |
| Dimensions | 1/16" O.D. Inside diameter: 1/32" Length: 6" |
