"Our job is helping you do your job"
This pushbutton is configured for 0.87" (22 mm), Flush, 1 N.O Contact. It has operating temperature range of -13 to 158°F (-25 to 70°C). It suits industrial machine control panels and process automation equipment.
This pushbutton is configured for 0.87" (22 mm), Flush, 1 N.O Contact. It has operating temperature range of -13 to 158°F (-25 to 70°C). It suits industrial machine control panels and process automation equipment.
Omega's rugged OMPBD7 pilot devices offer maximum flexibility and a wide choice for all applications. This 0.87" (22 mm) line is aesthetically appealing and modularly designed to make assembly and interchangeability easy.
Features
Applications
| Series | OMPBD7-NL Series |
| Type | pushbutton |
| Configuration | 0.87" (22 mm) |
| Configuration | Flush |
| Configuration | 1 N.O Contact |
| Configuration | Momentary |
| Configuration | Black |
| Material | Plastic |
| Configuration | Heavy Duty/Oil Tight |
| Configuration | with Latch & 1-Contact Block |
| Degree of Protection (Plastic) | UL Type 3/3R/4/4X/12/13 (IP65/66) |
| Degree of Protection (Metal) | UL Type 3/3R/4/12/13 (IP65/66) |
| Mechanical Durability (Momentary push buttons, momentary mushroom) | 10,000,000 Cycles per EN 60947-5-1 (Annex C) |
| Operating Temperature Range | -13 to 158°F (-25 to 70°C) |
| Short-Term Storage Temperature Range | -40 to 185°F (-40 to 85°C) |
| Humidity | 50...95% RH from 77 to 140°F (25 to 60°C) per Procedure IV of MIL-STD-810C, Method 507.1 cycling test |
| Thermal Current | 10 A maximum enclosed (104°F (40°C) ambient) to UL 508, EN 60947-5-1 |
| Insulation Voltage | Ui = 690 V (screw terminal), Ui = 300 V (screwless terminal) |
| Dielectric Strength (Minimum) | 2500 V for one minute |
| Mounting Torque (Plastic) | 15 lb-in (1.7 Nm) |
| Mounting Torque (Metal) | 40 lb-in (4.4 Nm) |
| Mechanical Life | Ten million operations (operators); five million (contact blocks) |
| Electrical Life | 500,000 cycles at 3 A to ten million at 0.1 A |
| Contact Durability (per EN 60947-5-1 Annex C) | 10,000,000 cycles |
| Vibration (Operators, assembled to panel) | Tested at 10...2000 Hz, 0.06" (1.52 mm) displacement (peak-to-peak) maximum/10 G maximum for 3 hr duration, no damage |
| Vibration (Back-of-Panel) | 10...2000 Hz, 0.06" (1.52 mm) displacement (peak-to-peak) maximum/10 G maximum 6 hr |
| Shock | Tested at 1/2 cycle sine wave for 11 ms; no damage at 100 G maximum |
| Operating Forces (Operators, typical with one contact block) | Flush/extended = 1.12 lbf (5 N); E-stop = 8.09 lbf (36 N); Mushroom = 2.02 lbf (9 N) |
| Operating Forces (Contact block, typical) | 0.76 lbf (3.4 N) each single circuit contact block; 5...6.5 N each dual circuit contact block |
| Operating Torque (typical with one contact block) | Selector switch = 0.25 N·m (2.2 lb-in.) |
| Push Button Travel to Change Electrical State | NC and NOEM0.060" (1.5 mm); NO and NCLB0.1" (2.5 mm) |
| Standard Contact Block Ratings | A600, Q600, 600 V AC, AC15, DC 13 to EN 60947-5-1 and UL 508, 17 V, 5 mA minimum |
| Low Voltage Contact Block Ratings | 5 V, 1 mA DC minimum., C300, R150, AC 15, DC 13 to EN 60947-5-1 and UL 508 |
| LED Module Ratings | 24 V AC (0...29 V AC) 31 mA 50/60 Hz; 24 V DC (10...30 V DC) 24 mA DC; 120 V AC (70...132 V AC) 25 mA 50/60 Hz; 240 V AC (180...264 V AC) 22 mA 50/60 Hz |
| Current Rating | 10 A continuous (Heavy-Duty) |
| Wire Capacity, Screw Terminal | Plastic: #18...12 AWG (0.75...2.5 mm2); Metal: Max (2) #14 AWG or (1) #12 AWG |
| Wire Capacity, Spring-Clamp Terminal | #18...14 AWG (0.75...1.5 mm2) |
| Recommended Tightening Torque on Screw Terminals | 0.7...0.9 N•m (6...8 lb-in) |
| External Short Circuit Protection (Standard blocks) | 10 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4) |
| External Short Circuit Protection (Low voltage contact blocks) | 6 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4) |
| Electrical Shock Protection | Finger-safe conforming to IP2X |
| Contact Operation | NO: slow double make and break; NC: slow double make and break - positive opening; NOEM: double break / double make / early make; NCLB: double break / double make, late break - positive opening; NCEB: double break / double make, early break - positive opening |
| Approvals | UL 46E, NEMA A600 and Q600 listed; front elements UL Recognized, assemblies UL Approved |
| Panel Hole Dimensions | 0.88" (22.3 mm) +0,4/-0 with 0.126" (3.2 mm) +0,2/-0 anti-rotation, 0.95" (24.1 mm) +0,4/-0 |
| Series | OMPBD7-NL Series |
| Type | pushbutton |
| Configuration | 0.87" (22 mm) |
| Configuration | Flush |
| Configuration | 1 N.O Contact |
| Configuration | Momentary |
| Configuration | Black |
| Material | Plastic |
| Configuration | Heavy Duty/Oil Tight |
| Configuration | with Latch & 1-Contact Block |
| Degree of Protection (Plastic) | UL Type 3/3R/4/4X/12/13 (IP65/66) |
| Degree of Protection (Metal) | UL Type 3/3R/4/12/13 (IP65/66) |
| Mechanical Durability (Momentary push buttons, momentary mushroom) | 10,000,000 Cycles per EN 60947-5-1 (Annex C) |
| Operating Temperature Range | -13 to 158°F (-25 to 70°C) |
| Short-Term Storage Temperature Range | -40 to 185°F (-40 to 85°C) |
| Humidity | 50...95% RH from 77 to 140°F (25 to 60°C) per Procedure IV of MIL-STD-810C, Method 507.1 cycling test |
| Thermal Current | 10 A maximum enclosed (104°F (40°C) ambient) to UL 508, EN 60947-5-1 |
| Insulation Voltage | Ui = 690 V (screw terminal), Ui = 300 V (screwless terminal) |
| Dielectric Strength (Minimum) | 2500 V for one minute |
| Mounting Torque (Plastic) | 15 lb-in (1.7 Nm) |
| Mounting Torque (Metal) | 40 lb-in (4.4 Nm) |
| Mechanical Life | Ten million operations (operators); five million (contact blocks) |
| Electrical Life | 500,000 cycles at 3 A to ten million at 0.1 A |
| Contact Durability (per EN 60947-5-1 Annex C) | 10,000,000 cycles |
| Vibration (Operators, assembled to panel) | Tested at 10...2000 Hz, 0.06" (1.52 mm) displacement (peak-to-peak) maximum/10 G maximum for 3 hr duration, no damage |
| Vibration (Back-of-Panel) | 10...2000 Hz, 0.06" (1.52 mm) displacement (peak-to-peak) maximum/10 G maximum 6 hr |
| Shock | Tested at 1/2 cycle sine wave for 11 ms; no damage at 100 G maximum |
| Operating Forces (Operators, typical with one contact block) | Flush/extended = 1.12 lbf (5 N); E-stop = 8.09 lbf (36 N); Mushroom = 2.02 lbf (9 N) |
| Operating Forces (Contact block, typical) | 0.76 lbf (3.4 N) each single circuit contact block; 5...6.5 N each dual circuit contact block |
| Operating Torque (typical with one contact block) | Selector switch = 0.25 N·m (2.2 lb-in.) |
| Push Button Travel to Change Electrical State | NC and NOEM0.060" (1.5 mm); NO and NCLB0.1" (2.5 mm) |
| Standard Contact Block Ratings | A600, Q600, 600 V AC, AC15, DC 13 to EN 60947-5-1 and UL 508, 17 V, 5 mA minimum |
| Low Voltage Contact Block Ratings | 5 V, 1 mA DC minimum., C300, R150, AC 15, DC 13 to EN 60947-5-1 and UL 508 |
| LED Module Ratings | 24 V AC (0...29 V AC) 31 mA 50/60 Hz; 24 V DC (10...30 V DC) 24 mA DC; 120 V AC (70...132 V AC) 25 mA 50/60 Hz; 240 V AC (180...264 V AC) 22 mA 50/60 Hz |
| Current Rating | 10 A continuous (Heavy-Duty) |
| Wire Capacity, Screw Terminal | Plastic: #18...12 AWG (0.75...2.5 mm2); Metal: Max (2) #14 AWG or (1) #12 AWG |
| Wire Capacity, Spring-Clamp Terminal | #18...14 AWG (0.75...1.5 mm2) |
| Recommended Tightening Torque on Screw Terminals | 0.7...0.9 N•m (6...8 lb-in) |
| External Short Circuit Protection (Standard blocks) | 10 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4) |
| External Short Circuit Protection (Low voltage contact blocks) | 6 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4) |
| Electrical Shock Protection | Finger-safe conforming to IP2X |
| Contact Operation | NO: slow double make and break; NC: slow double make and break - positive opening; NOEM: double break / double make / early make; NCLB: double break / double make, late break - positive opening; NCEB: double break / double make, early break - positive opening |
| Approvals | UL 46E, NEMA A600 and Q600 listed; front elements UL Recognized, assemblies UL Approved |
| Panel Hole Dimensions | 0.88" (22.3 mm) +0,4/-0 with 0.126" (3.2 mm) +0,2/-0 anti-rotation, 0.95" (24.1 mm) +0,4/-0 |
