"Our job is helping you do your job"
Image is for reference only, refer to product info for complete details.
Designed for direct surface heating, this 1 x 5" (2.5 x 12.7 cm) polyimide film flexible heater produces 25 W at 5 W/in² on 115 V. It is rated for use up to 302°F (150°C) and measures just 0.01" (0.25 mm) thick. Great for freeze protection for instruments and fluid lines.
Designed for direct surface heating, this 1 x 5" (2.5 x 12.7 cm) polyimide film flexible heater produces 25 W at 5 W/in² on 115 V. It is rated for use up to 302°F (150°C) and measures just 0.01" (0.25 mm) thick. Great for freeze protection for instruments and fluid lines.
Polyimide film insulated heaters are available in a variety of shapes, sizes, and wattages.
Polyimide film offers a high degree of resistance to chemicals. Flexible nature can fit into intrinsic voids & can be applied very easily.
Features
Applications
| Construction | Polyimide material encasing an Inconel 600 resistive foil element |
| Maximum thickness | 0.010" except at lead wire exit |
| Voltage | 115 Vac |
| Leads | PTFE insulated (UL 1180), 12" (305 mm) long, AWG 22 stranded (wire gauge varies with heater); silicone patch added for strain relief |
| Dielectric strength | 1250 Vac for 1 sec |
| Minimum bending radius | 0.032" |
| Watt density tolerance | ±10% |
| Standard thickness | 0.010" |
| Outlet thickness | 0.060" |
| Optional pressure-sensitive adhesive (PSA) | 3M 468MP or equivalent, typically 0.001" thick |
| Watt density | 5 W/in² |
| Total wattage | 25 W |
| Operating temperature | -57 to 150°C (-70 to 302°F) |
| PSA backing | Without PSA |
| Dimensions | 1" (2.54 cm) (W) x 5" (12.7 cm) (L) |
| Construction | Polyimide material encasing an Inconel 600 resistive foil element |
| Maximum thickness | 0.010" except at lead wire exit |
| Voltage | 115 Vac |
| Leads | PTFE insulated (UL 1180), 12" (305 mm) long, AWG 22 stranded (wire gauge varies with heater); silicone patch added for strain relief |
| Dielectric strength | 1250 Vac for 1 sec |
| Minimum bending radius | 0.032" |
| Watt density tolerance | ±10% |
| Standard thickness | 0.010" |
| Outlet thickness | 0.060" |
| Optional pressure-sensitive adhesive (PSA) | 3M 468MP or equivalent, typically 0.001" thick |
| Watt density | 5 W/in² |
| Total wattage | 25 W |
| Operating temperature | -57 to 150°C (-70 to 302°F) |
| PSA backing | Without PSA |
| Dimensions | 1" (2.54 cm) (W) x 5" (12.7 cm) (L) |
