"Our job is helping you do your job"
Designed for freeze protection and asphalt plants and oil refineries, this heating cable provides High Temperature Constant Wattage, PFA Extruded Jacket, 12 W/ft Density.
Designed for freeze protection and asphalt plants and oil refineries, this heating cable provides High Temperature Constant Wattage, PFA Extruded Jacket, 12 W/ft Density.
OMEGALUX KE cable is a low watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments.
Features
Applications
| Series | KE Series |
| Type | heating cable |
| Configuration | High Temperature Constant Wattage |
| Configuration | PFA Extruded Jacket |
| Configuration | 12 W/ft Density |
| Range | 500°F (260°C) |
| Configuration | 25' (7.62 m) |
| Cable | 0.33" (8.4 mm) x 0.225" (5.7 mm) Cable |
| Supply voltage | 240 V AC |
| Configuration | 12 AWG |
| Configuration | KE Series |
| Configuration | Foot |
| Wattage | 4, 8 and 12 W/ft (13.1, 26.2 and 39.4 W/m) |
| Continuous Exposure Rating | 500°F (260°C) |
| Maximum Short Term Exposure Temperature | 550°F (287°C) (de-energized) |
| Main Conductor Bus Wires | 12 AWG, multi-stranded, nickel plated copper |
| Extruded Jacket | 20 mil PFA |
| Dielectric Strength | In excess of 2500 V |
| Voltage (All Common Voltages) | 120, 208, 240, 277 and 480 V AC |
| Maximum Process Temperature (ground cable overlap) | less than 310°F (154°C) |
| Resistance Wire | Nickel chromium tension resistance wire |
| Extruded Insulation | PFA 500°F (260°C) extruded insulation |
| Moisture Barrier | Two layers of nonflammable polyimide film applied in reverse directions, heat fused |
| Braided Sheath | 128 strands of 27 ga. 50% tinned copper / 50% stainless steel |
| Minimum Length | 25' (7.6 m) |
| Hazardous Area Classification | Class 1, Groups B, C, and D, Division 2 Classified Areas |
| Outside Dimension | Nom. 0.330 x 0.225" (8.38 x 5.72 mm) |
| Series | KE Series |
| Type | heating cable |
| Configuration | High Temperature Constant Wattage |
| Configuration | PFA Extruded Jacket |
| Configuration | 12 W/ft Density |
| Range | 500°F (260°C) |
| Configuration | 25' (7.62 m) |
| Cable | 0.33" (8.4 mm) x 0.225" (5.7 mm) Cable |
| Supply voltage | 240 V AC |
| Configuration | 12 AWG |
| Configuration | KE Series |
| Configuration | Foot |
| Wattage | 4, 8 and 12 W/ft (13.1, 26.2 and 39.4 W/m) |
| Continuous Exposure Rating | 500°F (260°C) |
| Maximum Short Term Exposure Temperature | 550°F (287°C) (de-energized) |
| Main Conductor Bus Wires | 12 AWG, multi-stranded, nickel plated copper |
| Extruded Jacket | 20 mil PFA |
| Dielectric Strength | In excess of 2500 V |
| Voltage (All Common Voltages) | 120, 208, 240, 277 and 480 V AC |
| Maximum Process Temperature (ground cable overlap) | less than 310°F (154°C) |
| Resistance Wire | Nickel chromium tension resistance wire |
| Extruded Insulation | PFA 500°F (260°C) extruded insulation |
| Moisture Barrier | Two layers of nonflammable polyimide film applied in reverse directions, heat fused |
| Braided Sheath | 128 strands of 27 ga. 50% tinned copper / 50% stainless steel |
| Minimum Length | 25' (7.6 m) |
| Hazardous Area Classification | Class 1, Groups B, C, and D, Division 2 Classified Areas |
| Outside Dimension | Nom. 0.330 x 0.225" (8.38 x 5.72 mm) |
