"Our job is helping you do your job"
Built for plastic extruders and plastic molding, this cartridge heater is supplied with Hi-Density, 750 W, 106 W/in2. It also suits packaging equipment and laminating presses.
Built for plastic extruders and plastic molding, this cartridge heater is supplied with Hi-Density, 750 W, 106 W/in2. It also suits packaging equipment and laminating presses.
The standard termination for Hi-Density Cartridge Heaters is Type N, 10" (254 mm) long nickel conductor lead wires externally connected to 1-1/4" (32 mm) solid conductor terminal pins. The lead wires have fiberglass insulation and are UL approved for temperatures up to 482°F (482°F (250°C)).
Features
Applications
| Series | HDC00426 Series |
| Type | cartridge heater |
| Configuration | Hi-Density |
| Configuration | 750 W |
| Configuration | 106 W/in2 |
| Supply voltage | 120 V AC |
| Configuration | 5" (12.7 cm) (L) |
| Configuration | 1/2" (12.7 mm) (D) |
| Configuration | 10" (25.4 cm) Lead |
| Maximum Temperature | 1400°F (760°C) |
| Maximum Watt Density | 100 to 300 W/in2 (15.5 to 46.5 W/cm2) depending on heater size and operating temperature |
| Standard Sheath Material | 321 Stainless Steel |
| Resistance Wire | Grade "A" Nickel-Chrome resistance wire precisely wound on a high purity magnesium oxide core |
| Fill | Specially selected grain size high purity Magnesium Oxide (MgO) |
| Wattage Tolerance | +10, -15% |
| Resistance Tolerance | +15, -10% |
| Standard Termination | Type N: 10" (254 mm) long nickel conductor lead wires externally connected to 11/4" (32 mm) solid conductor terminal pins; fiberglass insulation, UL approved up to 482°F (250°C); mica insulated up to 842°F (450°C) optional |
| End Seal | Welded end disc made from the same material as the sheath; ceramic end cap and swaged-in lava plug |
| Maximum Voltage | 240 V (1/8" (3.2 mm) to 1/2" (12.7 mm) diameter); 480 V (5/8" (15.9 mm) to 1" (2.5 cm) diameter, when applicable) |
| Nominal Diameter (series range) | 1/8" (3.2 mm) to 1" (2.5 cm) |
| Camber Tolerance | 0.010" (0.254 mm) per foot up to 12" (305 mm) long; 0.020" (0.508 mm) per foot over 12" (305 mm) long |
| Approvals | UL recognized and CSA certified (UL File E65652, CSA File 043099) |
| Series | HDC00426 Series |
| Type | cartridge heater |
| Configuration | Hi-Density |
| Configuration | 750 W |
| Configuration | 106 W/in2 |
| Supply voltage | 120 V AC |
| Configuration | 5" (12.7 cm) (L) |
| Configuration | 1/2" (12.7 mm) (D) |
| Configuration | 10" (25.4 cm) Lead |
| Maximum Temperature | 1400°F (760°C) |
| Maximum Watt Density | 100 to 300 W/in2 (15.5 to 46.5 W/cm2) depending on heater size and operating temperature |
| Standard Sheath Material | 321 Stainless Steel |
| Resistance Wire | Grade "A" Nickel-Chrome resistance wire precisely wound on a high purity magnesium oxide core |
| Fill | Specially selected grain size high purity Magnesium Oxide (MgO) |
| Wattage Tolerance | +10, -15% |
| Resistance Tolerance | +15, -10% |
| Standard Termination | Type N: 10" (254 mm) long nickel conductor lead wires externally connected to 11/4" (32 mm) solid conductor terminal pins; fiberglass insulation, UL approved up to 482°F (250°C); mica insulated up to 842°F (450°C) optional |
| End Seal | Welded end disc made from the same material as the sheath; ceramic end cap and swaged-in lava plug |
| Maximum Voltage | 240 V (1/8" (3.2 mm) to 1/2" (12.7 mm) diameter); 480 V (5/8" (15.9 mm) to 1" (2.5 cm) diameter, when applicable) |
| Nominal Diameter (series range) | 1/8" (3.2 mm) to 1" (2.5 cm) |
| Camber Tolerance | 0.010" (0.254 mm) per foot up to 12" (305 mm) long; 0.020" (0.508 mm) per foot over 12" (305 mm) long |
| Approvals | UL recognized and CSA certified (UL File E65652, CSA File 043099) |
