"Our job is helping you do your job"
With Ceramic Insulated, 240 V, 2500 W, this strip heater is used for dies and plastic forming and sealing.
With Ceramic Insulated, 240 V, 2500 W, this strip heater is used for dies and plastic forming and sealing.
The HCS Series stainless steel strip heaters provide clean, dependable heat with sheath temperatures up to 1200°F (1200°F (649°C)) and watt densities up to 40 W per square inch. Because of the seamless stainless steel sheath, these ceramic-insulated strip heaters are dimensionally stable in milled slots.
Features
Applications
| Series | HCS Series |
| Type | strip heater |
| Configuration | Ceramic Insulated |
| Configuration | 240 V |
| Configuration | 2500 W |
| Configuration | Standard Termination Offset at One End |
| Material | SS Sheath |
| Range | 1200°F (649°C) |
| Configuration | 35.75" (90.8 cm) x 1.5" (3.8 cm) |
| Configuration | Dies & Molds Application |
| Sheath | Seamless stainless steel |
| Maximum Sheath Temperature | 1200°F (649°C) |
| Maximum Watt Density | 40 W/in2 (6.2 W/cm2) |
| Width Tolerance | 1.500" (3.8 cm) ±0.010" (0.3 mm) |
| Thickness Tolerance | 0.375" (9.5 mm) ±0.005" (0.1 mm) |
| Wattage Tolerance | -10 to 5% at rated voltage |
| Voltage | 120 V and 240 V |
| Wattage Range | 150 to 2500 W (per To Order table) |
| Length Tolerance | Up to 24" (61 cm): ±1/16" (1.6 mm); 24" (61 cm) and over: ±1/8" (3.2 mm) |
| Terminals | Post terminals (10 to 24 terminals) |
| Element Support | Ceramic element support |
| Element Wire | Element wire situated close to outside surface for maximum heat transfer and minimum internal temperature while preserving good dielectric qualities |
| Packing | Magnesium oxide packing |
| Series | HCS Series |
| Type | strip heater |
| Configuration | Ceramic Insulated |
| Configuration | 240 V |
| Configuration | 2500 W |
| Configuration | Standard Termination Offset at One End |
| Material | SS Sheath |
| Range | 1200°F (649°C) |
| Configuration | 35.75" (90.8 cm) x 1.5" (3.8 cm) |
| Configuration | Dies & Molds Application |
| Sheath | Seamless stainless steel |
| Maximum Sheath Temperature | 1200°F (649°C) |
| Maximum Watt Density | 40 W/in2 (6.2 W/cm2) |
| Width Tolerance | 1.500" (3.8 cm) ±0.010" (0.3 mm) |
| Thickness Tolerance | 0.375" (9.5 mm) ±0.005" (0.1 mm) |
| Wattage Tolerance | -10 to 5% at rated voltage |
| Voltage | 120 V and 240 V |
| Wattage Range | 150 to 2500 W (per To Order table) |
| Length Tolerance | Up to 24" (61 cm): ±1/16" (1.6 mm); 24" (61 cm) and over: ±1/8" (3.2 mm) |
| Terminals | Post terminals (10 to 24 terminals) |
| Element Support | Ceramic element support |
| Element Wire | Element wire situated close to outside surface for maximum heat transfer and minimum internal temperature while preserving good dielectric qualities |
| Packing | Magnesium oxide packing |
