"Our job is helping you do your job"
Built for liquid flow measurement, this turbine flow meter reads 5 to 50 GPM (18.9 to 189.3 LPM) with ±1.5% accuracy. It shows flow rate and totalized volume on an LCD display and connects through a 1" female NPT fitting. Its wetted path uses a 316 stainless steel body with ceramic and tungsten carbide internals and FKM seals. Best for process liquid batching and dispensing.
Built for liquid flow measurement, this turbine flow meter reads 5 to 50 GPM (18.9 to 189.3 LPM) with ±1.5% accuracy. It shows flow rate and totalized volume on an LCD display and connects through a 1" female NPT fitting. Its wetted path uses a 316 stainless steel body with ceramic and tungsten carbide internals and FKM seals. Best for process liquid batching and dispensing.
A full line of FLOMEC(R) G2 Series Turbine Meters are available in a variety of housing materials.
Features
Applications
| Repeatability | ±0.1% (PVDF is ±0.3%) |
| Calibration report | Comes standard with G2 Series meters. N.I.S.T. certification available. |
| Ingress protection | IP65 |
| Fitting type | NPT (Female) |
| Turbine material | Stainless Steel |
| Meter size | 1" |
| Housing material | 316 Stainless Steel |
| Flow range | 5 - 50 GPM (19 - 190 L/min) |
| Accuracy (% of reading) | ±1.0% (turbine with computer) |
| Pressure rating | 1,500 psi (102 bar) |
| Operating temperature range | -40°F to 250°F (-40°C to 121°C) with Intrinsically Safe Display: 0°F to +129°F (-18°C to +54°C) |
| Typical K-factor | 565 PPG (149 Pulses/L) |
| Frequency range | 47-470 Hz @ 5-50 GPM (19-190 L/min) |
| Wetted materials | Housing: 316 Stainless Steel Bearings: 96% Alumina Oxide Ceramic Shaft: Tungsten Carbide Rotor: PVDF Rings: 316 Stainless Steel |
| Electronic choice | Q9 2-Button Computer |
| Calibration of computer / display | Gallons Per Minute (Gallons default) |
| Dimensions | Height: 1.9" (48.3 mm) Width: 2.0" (50.8 mm) Length: 4.5" (114.3 mm) Q9 Display adds 0.72" (18 mm) to height |
| Repeatability | ±0.1% (PVDF is ±0.3%) |
| Calibration report | Comes standard with G2 Series meters. N.I.S.T. certification available. |
| Ingress protection | IP65 |
| Fitting type | NPT (Female) |
| Turbine material | Stainless Steel |
| Meter size | 1" |
| Housing material | 316 Stainless Steel |
| Flow range | 5 - 50 GPM (19 - 190 L/min) |
| Accuracy (% of reading) | ±1.0% (turbine with computer) |
| Pressure rating | 1,500 psi (102 bar) |
| Operating temperature range | -40°F to 250°F (-40°C to 121°C) with Intrinsically Safe Display: 0°F to +129°F (-18°C to +54°C) |
| Typical K-factor | 565 PPG (149 Pulses/L) |
| Frequency range | 47-470 Hz @ 5-50 GPM (19-190 L/min) |
| Wetted materials | Housing: 316 Stainless Steel Bearings: 96% Alumina Oxide Ceramic Shaft: Tungsten Carbide Rotor: PVDF Rings: 316 Stainless Steel |
| Electronic choice | Q9 2-Button Computer |
| Calibration of computer / display | Gallons Per Minute (Gallons default) |
| Dimensions | Height: 1.9" (48.3 mm) Width: 2.0" (50.8 mm) Length: 4.5" (114.3 mm) Q9 Display adds 0.72" (18 mm) to height |
