"Our job is helping you do your job"
Made for pipe and tubing heating, this rope heater provides 500 W at 120 V. It has a 4 W/in2 watt density and a Fiberglass sheath. It is used for freeze protection.
Made for pipe and tubing heating, this rope heater provides 500 W at 120 V. It has a 4 W/in2 watt density and a Fiberglass sheath. It is used for freeze protection.
OMEGALUX rope heaters apply heat to tubing with diameters as small as 1/8" (3.2 mm). Featuring a maximum allowable operating temperature of 900°F (482°C), the FGR Series rope heaters can be wrapped around either conductive or non-conductive surfaces. Each end terminates with 24" (610 mm) long fiberglass-insulated lead wire.
Features
Applications
| Series | FGR Series |
| Type | Rope Heater |
| Voltage | 120 V |
| Power | 500 W |
| Watt density | 4 W/in2 |
| Maximum temperature | 900°F (482°C) |
| Sheath / material | Fiberglass |
| Maximum operating temperature | 900°F (482°C) |
| Standard diameter | 3/16" (5 mm) |
| Operating voltage | 120 V AC/DC, 240 V optional |
| Linear wattage | 4 W/inch |
| Lead length | 24" (61 cm) |
| Termination | Stripped leads |
| Insulation | Fiberglass |
| Maximum allowable Temperature | 900°F (482°C) |
| Suitable for use on Conductive Surface | Yes |
| Resists moisture Vapor or Chemicals | No |
| Heater length (standard) | 0.9, 1.8, 2.4 or 3.0 m (3, 6, 8 or 10') |
| Lead wire | Each end terminates with 24" (610 mm) long fiberglass-insulated lead wire |
| Minimum tubing diameter | Applies heat to tubing with diameters as small as 1/8" (3.2 mm) |
| Series | FGR Series |
| Type | Rope Heater |
| Voltage | 120 V |
| Power | 500 W |
| Watt density | 4 W/in2 |
| Maximum temperature | 900°F (482°C) |
| Sheath / material | Fiberglass |
| Maximum operating temperature | 900°F (482°C) |
| Standard diameter | 3/16" (5 mm) |
| Operating voltage | 120 V AC/DC, 240 V optional |
| Linear wattage | 4 W/inch |
| Lead length | 24" (61 cm) |
| Termination | Stripped leads |
| Insulation | Fiberglass |
| Maximum allowable Temperature | 900°F (482°C) |
| Suitable for use on Conductive Surface | Yes |
| Resists moisture Vapor or Chemicals | No |
| Heater length (standard) | 0.9, 1.8, 2.4 or 3.0 m (3, 6, 8 or 10') |
| Lead wire | Each end terminates with 24" (610 mm) long fiberglass-insulated lead wire |
| Minimum tubing diameter | Applies heat to tubing with diameters as small as 1/8" (3.2 mm) |
