"Our job is helping you do your job"
Configured for Pulse, 110 V AC, 1-Input, this batch controller suits batching applications and dispensing systems. It has accuracy of 0.01% FS (±1 display digit).
Configured for Pulse, 110 V AC, 1-Input, this batch controller suits batching applications and dispensing systems. It has accuracy of 0.01% FS (±1 display digit).
The DPF11 miniature batcher is ideal for all batching applications. The display will show batch amount, rate and batch/grand total at the push of a button. The start and stop buttons make batching simple.
The DPF11 is a 6-digit totalizer and 4.5 digit ratemeter with two relay outputs. One output is dedicated to the batch amount (preset A), the other can be activated for prewarn or batch/grand total.
The unit can count up to the preset (reset to 0) or down from the preset (set to preset). Start, stop and reset functions can be activated from the front panel or remote inputs.
Features
Applications
| Series | DPF11 Series |
| Type | batch controller |
| Configuration | Pulse |
| Supply voltage | 110 V AC |
| Input | 1-Input |
| Panel size | 1/8 DIN |
| Configuration | 10 kHz |
| Output type | 2 Relays |
| Display | 6 Digit Single Display |
| Accuracy | 0.01% FS (±1 display digit) |
| Display | 6-digit, 0.55" (13.97 mm) high LED (±1 display digit) |
| Input Power | 110 V AC ±15%, 220 V AC ±15%, 24 V AC ±15% |
| Current | 250 mA DC maximum or 6.5 VA AC |
| Output Power | 12 V DC @ 50 mA, unregulated -10 +50% (AC powered units only) |
| Pulse Input Low | 0 to 1 V DC |
| Pulse Input High | 4 to 30 V DC 10 kΩ impedance, up to 10 kHz; minimum 0.05 Hz for rate indication |
| Mag. Input | 30 mV input, (50 V maximum) signals 10 kΩ impedance, 5 kHz maximum |
| Output Relays | (2) rated 5 A, 120/240 V AC or 28 V DC (NC relay contacts and NPN transistor output available with solder jumpers) |
| Memory | EEPROM stores data for 10 years if power is lost |
| Approvals | CE approved |
| Panel Cutout | 3.622 x 1.772 x 4.245" (92 x 45 x 108 mm) |
| Humidity | 0 to 90% RH, non-condensing |
| Operating Temperature | 32 to 130°F (0 to 54°C) |
| Storage Temperature | -40 to 200°F (-40 to 93°C) |
| Analog Output (option) | 0 or 4 to 20 mA proportional to rate/total |
| Communications (option) | RS232 or RS422; up to 99 units can communicate to a host computer on a single RS232 or RS422 loop |
| Front Panel Rating | NEMA 4X (IP65) |
| Dimensions | 4.44 x 2.63 x 4.95" (113 x 67 x 126 mm) |
| Shipping Weight | 2 lb (9 kg) |
| Series | DPF11 Series |
| Type | batch controller |
| Configuration | Pulse |
| Supply voltage | 110 V AC |
| Input | 1-Input |
| Panel size | 1/8 DIN |
| Configuration | 10 kHz |
| Output type | 2 Relays |
| Display | 6 Digit Single Display |
| Accuracy | 0.01% FS (±1 display digit) |
| Display | 6-digit, 0.55" (13.97 mm) high LED (±1 display digit) |
| Input Power | 110 V AC ±15%, 220 V AC ±15%, 24 V AC ±15% |
| Current | 250 mA DC maximum or 6.5 VA AC |
| Output Power | 12 V DC @ 50 mA, unregulated -10 +50% (AC powered units only) |
| Pulse Input Low | 0 to 1 V DC |
| Pulse Input High | 4 to 30 V DC 10 kΩ impedance, up to 10 kHz; minimum 0.05 Hz for rate indication |
| Mag. Input | 30 mV input, (50 V maximum) signals 10 kΩ impedance, 5 kHz maximum |
| Output Relays | (2) rated 5 A, 120/240 V AC or 28 V DC (NC relay contacts and NPN transistor output available with solder jumpers) |
| Memory | EEPROM stores data for 10 years if power is lost |
| Approvals | CE approved |
| Panel Cutout | 3.622 x 1.772 x 4.245" (92 x 45 x 108 mm) |
| Humidity | 0 to 90% RH, non-condensing |
| Operating Temperature | 32 to 130°F (0 to 54°C) |
| Storage Temperature | -40 to 200°F (-40 to 93°C) |
| Analog Output (option) | 0 or 4 to 20 mA proportional to rate/total |
| Communications (option) | RS232 or RS422; up to 99 units can communicate to a host computer on a single RS232 or RS422 loop |
| Front Panel Rating | NEMA 4X (IP65) |
| Dimensions | 4.44 x 2.63 x 4.95" (113 x 67 x 126 mm) |
| Shipping Weight | 2 lb (9 kg) |
