"Our job is helping you do your job"
With Touch-Safe, 120 V AC/V DC to 240 V AC/V DC, 20 W, this enclosure heater is used for enclosure condensation prevention and maintaining minimum enclosure temperature.
With Touch-Safe, 120 V AC/V DC to 240 V AC/V DC, 20 W, this enclosure heater is used for enclosure condensation prevention and maintaining minimum enclosure temperature.
These heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed for permanent operation.
The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed for permanent operation.
Features
Applications
| Operating voltage | 120 - 240 V AC/DC* (min. 110 V, max. 265 V) |
| Series | CSK060 Series |
| Heating element | PTC resistor - temperature limiting |
| Type | enclosure heater |
| Surface temperature | < 185°F (85°C) (according to VDE 0100), except upper protective grille |
| Configuration | Touch-Safe |
| Connection | 2-pole terminal 2.5 mm², torque 0.8 N·m max. |
| Supply voltage | 120 V AC/V DC to 240 V AC/V DC |
| Casing | plastic according to UL94 V-0, black |
| Configuration | 20 W |
| Mounting | clip for 35 mm DIN rail, EN 60715 |
| Panel size | DIN Rail Mountable |
| Fitting position | vertical airflow (air outlet up, connection on bottom) |
| Range | -49 to 158°F (-45 to 70°C) (-49°F to 158°F) |
| Configuration | 2.5 A Maximum Inrush Current |
| Operating / Storage temperature | -49°F to +158°F (-45°C to +70°C) |
| Operating Voltage | 120 to 240 V AC/V DC (minimum 110 V, maximum 265 V) |
| Operating / Storage humidity | max. 90 % RH (non-condensing) |
| Heating Element | PTC resistor; temperature limiting |
| Protection type / Protection class | IP20 / II (double insulated) |
| Surface Temperature | <185°F (<85°C), (according to VDE 0100), except upper protective grille |
| Approvals | VDE + UL File No. E150057 (according to UL 499, intended for the use within an enclosure in accordance with UL 508A) |
| Connection | 2-pole terminal 2.5 mm2 (0.1" (2.5 mm)), torque 7.08 in-lb (0.8 Nm) maximum |
| Heating capacity | 20 W |
| Casing | Plastic according to UL94 V-0, black |
| Inrush current max. | 2.5 A |
| Mounting | Clip for 1.4" (35 mm) DIN rail, EN 5002 |
| Pre-fuse T (time-delay) | 2 A |
| Fitting Position | Vertical |
| Dimensions | 3.86" x 1.50" x 2.95" (98 x 38 x 75 mm) |
| Operating/Storage Temperature | -4 to 158°F (-20 to 70°C) |
| Weight | 0.66 lb (0.3 kg) |
| Protection Type/Protection Class | NEMA 2 (IP20)/II (double insulated) |
| Approvals | VDE |
| Heating Capacity | 20 W (at 68°F (20°C) ambient temperature) |
| Inrush Current Max | 2.5 A |
| Thermostat | FTO 011 (contact breaker, normally closed) |
| Included | Comes complete with operator's manual |
| Dimensions | 3.9 x 3.0 x 1.5" (9.8 x 7.5 x 3.8 cm) |
| Weight | 10.6 oz (0.30 kg) |
| Operating voltage | 120 - 240 V AC/DC* (min. 110 V, max. 265 V) |
| Series | CSK060 Series |
| Heating element | PTC resistor - temperature limiting |
| Type | enclosure heater |
| Surface temperature | < 185°F (85°C) (according to VDE 0100), except upper protective grille |
| Configuration | Touch-Safe |
| Connection | 2-pole terminal 2.5 mm², torque 0.8 N·m max. |
| Supply voltage | 120 V AC/V DC to 240 V AC/V DC |
| Casing | plastic according to UL94 V-0, black |
| Configuration | 20 W |
| Mounting | clip for 35 mm DIN rail, EN 60715 |
| Panel size | DIN Rail Mountable |
| Fitting position | vertical airflow (air outlet up, connection on bottom) |
| Range | -49 to 158°F (-45 to 70°C) (-49°F to 158°F) |
| Configuration | 2.5 A Maximum Inrush Current |
| Operating / Storage temperature | -49°F to +158°F (-45°C to +70°C) |
| Operating Voltage | 120 to 240 V AC/V DC (minimum 110 V, maximum 265 V) |
| Operating / Storage humidity | max. 90 % RH (non-condensing) |
| Heating Element | PTC resistor; temperature limiting |
| Protection type / Protection class | IP20 / II (double insulated) |
| Surface Temperature | <185°F (<85°C), (according to VDE 0100), except upper protective grille |
| Approvals | VDE + UL File No. E150057 (according to UL 499, intended for the use within an enclosure in accordance with UL 508A) |
| Connection | 2-pole terminal 2.5 mm2 (0.1" (2.5 mm)), torque 7.08 in-lb (0.8 Nm) maximum |
| Heating capacity | 20 W |
| Casing | Plastic according to UL94 V-0, black |
| Inrush current max. | 2.5 A |
| Mounting | Clip for 1.4" (35 mm) DIN rail, EN 5002 |
| Pre-fuse T (time-delay) | 2 A |
| Fitting Position | Vertical |
| Dimensions | 3.86" x 1.50" x 2.95" (98 x 38 x 75 mm) |
| Operating/Storage Temperature | -4 to 158°F (-20 to 70°C) |
| Weight | 0.66 lb (0.3 kg) |
| Protection Type/Protection Class | NEMA 2 (IP20)/II (double insulated) |
| Approvals | VDE |
| Heating Capacity | 20 W (at 68°F (20°C) ambient temperature) |
| Inrush Current Max | 2.5 A |
| Thermostat | FTO 011 (contact breaker, normally closed) |
| Included | Comes complete with operator's manual |
| Dimensions | 3.9 x 3.0 x 1.5" (9.8 x 7.5 x 3.8 cm) |
| Weight | 10.6 oz (0.30 kg) |
