"Our job is helping you do your job"
Made for mold and die heating, this cartridge heater provides 135 W at 120 V AC. It has a 85 W/in2 watt density and an SS sheath. It is used for platen and hot plate heating.
Made for mold and die heating, this cartridge heater provides 135 W at 120 V AC. It has a 85 W/in2 watt density and an SS sheath. It is used for platen and hot plate heating.
OMEGALUX CS Series cartridge heaters provide high wattage in limited spaces. They are manufactured with 300 Series stainless steel sheaths to precise dimensions and tolerances to ensure maximum heat transfer for minimum core temperature and faster heating.
Features
Applications
| Series | CSH Series |
| Type | Cartridge Heater |
| Voltage | 120 V AC |
| Power | 135 W |
| Watt density | 85 W/in2 |
| Maximum sheath temperature | 1400°F (760°C) |
| Sheath material | 300 Series stainless steel |
| Lead length | 6" (15.2 cm) |
| Insulation | Ceramic / MgO |
| Wattage tolerance | +5 to -10% at rated voltage |
| Diameter range | 1/8 to 3/4" (3.2 to 19 mm) |
| Lead insulation | Fiberglass, rated to 482°F (250°C) |
| Diameter tolerance | From 0.001 to 0.009" (0.025 to 0.229 mm) less the nominal diameter in inches |
| Length tolerance | ±2% or 1/16" (±1.6 mm), whichever is greater |
| Camber tolerance | 0.07" (1.7 mm)/m (0.020" (0.5 mm)/ft) of length for units up to 12" (305 mm) L |
| Sheath temperature | to 1400°F (760°C) |
| Dimensions | 2 1/2" (6.3 cm) (L) |
| Series | CSH Series |
| Type | Cartridge Heater |
| Voltage | 120 V AC |
| Power | 135 W |
| Watt density | 85 W/in2 |
| Maximum sheath temperature | 1400°F (760°C) |
| Sheath material | 300 Series stainless steel |
| Lead length | 6" (15.2 cm) |
| Insulation | Ceramic / MgO |
| Wattage tolerance | +5 to -10% at rated voltage |
| Diameter range | 1/8 to 3/4" (3.2 to 19 mm) |
| Lead insulation | Fiberglass, rated to 482°F (250°C) |
| Diameter tolerance | From 0.001 to 0.009" (0.025 to 0.229 mm) less the nominal diameter in inches |
| Length tolerance | ±2% or 1/16" (±1.6 mm), whichever is greater |
| Camber tolerance | 0.07" (1.7 mm)/m (0.020" (0.5 mm)/ft) of length for units up to 12" (305 mm) L |
| Sheath temperature | to 1400°F (760°C) |
| Dimensions | 2 1/2" (6.3 cm) (L) |
