"Our job is helping you do your job"
This enclosure heater provides 50 W at 120 to 240 V AC. It has a maximum temperature of -40 to 158°F (-40 to 70°C). It suits condensation prevention and enclosure climate control.
This enclosure heater provides 50 W at 120 to 240 V AC. It has a maximum temperature of -40 to 158°F (-40 to 70°C). It suits condensation prevention and enclosure climate control.
Touch-safe heater for use in enclosures with electrical/electronic components. The design of the heater supports natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design.
Features
Applications
| Series | CSF060 Series |
| Type | Enclosure Heater |
| Voltage | 120 to 240 V AC |
| Power | 50 W |
| Maximum temperature | -40 to 158°F (-40 to 70°C) |
| Termination | DIN Clip for 1.4" (35 mm) DIN Rail |
| Operating voltage | 120 to 240 V AC |
| Protection class | NEMA 2 (IP20) / Class II double insulated |
| Heating Capacity Range | 50 to 150 W |
| Heating Element | PTC resistor |
| Temperature Limiting / Surface Temperature | <176°F (80°C), except upper protective grille |
| Connection | 4-pole terminal 2.5 mm2, (0.10 in2) torque 7.08 in-lb (0.8 Nm) maximum |
| Casing | Plastic according to UL94 V-0, black |
| Mounting | Clip for 1.4" (35 mm) DIN rail, EN 50022 |
| Fitting Position | Vertical |
| Operating | -40 to 158°F (-40 to 70°C) |
| Storage | -49 to 158°F (-45 to 70°C) |
| Protection Type / Protection Class | NEMA 2 (IP20)/II (double insulated) |
| Approvals | VDE |
| Switch-Off Temperature | 59°F (15°C) (Tolerance of ±5K) |
| Starting Temperature | 41°F (5°C) (Tolerance of ±5K) |
| Thermostat | With fixed point thermostat 59°F (15°C) open/41°F (5°C) close |
| Series | CSF060 Series |
| Type | Enclosure Heater |
| Voltage | 120 to 240 V AC |
| Power | 50 W |
| Maximum temperature | -40 to 158°F (-40 to 70°C) |
| Termination | DIN Clip for 1.4" (35 mm) DIN Rail |
| Operating voltage | 120 to 240 V AC |
| Protection class | NEMA 2 (IP20) / Class II double insulated |
| Heating Capacity Range | 50 to 150 W |
| Heating Element | PTC resistor |
| Temperature Limiting / Surface Temperature | <176°F (80°C), except upper protective grille |
| Connection | 4-pole terminal 2.5 mm2, (0.10 in2) torque 7.08 in-lb (0.8 Nm) maximum |
| Casing | Plastic according to UL94 V-0, black |
| Mounting | Clip for 1.4" (35 mm) DIN rail, EN 50022 |
| Fitting Position | Vertical |
| Operating | -40 to 158°F (-40 to 70°C) |
| Storage | -49 to 158°F (-45 to 70°C) |
| Protection Type / Protection Class | NEMA 2 (IP20)/II (double insulated) |
| Approvals | VDE |
| Switch-Off Temperature | 59°F (15°C) (Tolerance of ±5K) |
| Starting Temperature | 41°F (5°C) (Tolerance of ±5K) |
| Thermostat | With fixed point thermostat 59°F (15°C) open/41°F (5°C) close |
