"Our job is helping you do your job"
Designed for heating enclosures with electrical components and preventing condensation in control cabinets, this enclosure heater provides Touch-Safe, 120 V AC/V DC to 240 V AC/V DC, 100 W.
Designed for heating enclosures with electrical components and preventing condensation in control cabinets, this enclosure heater provides Touch-Safe, 120 V AC/V DC to 240 V AC/V DC, 100 W.
Touch-safe heater for the use in enclosures with electrical/electronic components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design.
Features
Applications
| Series | CS060 Series |
| Type | enclosure heater |
| Configuration | Touch-Safe |
| Supply voltage | 120 V AC/V DC to 240 V AC/V DC |
| Configuration | 100 W |
| Panel size | DIN Clip for 1.4" (35 mm) DIN Rail |
| Range | -49 to 158°F (-45 to 70°C) (-49°F to 158°F) |
| Configuration | 4.5 A Maximum Inrush Current |
| Operating Voltage | 120 to 240 V AC/V DC (minimum 110 V, maximum 265 V) |
| Heating Element | PTC resistor: temperature limiting |
| Protection Type/Protection Class | NEMA 2 (IP20)/II (double insulated) |
| Approvals | VDE |
| Surface Temperature | <176°F (<80°C), except upper protective grille |
| Connection | 4-pole terminal 2.5 mm2, torque 7.08 in-lb (0.8 Nm) maximum |
| Casing | Plastic according to UL94 V-0, black |
| Mounting | DIN clip for 1.4" (35 mm) DIN rail, EN 50022 |
| Fitting Position | Vertical |
| Operating Temperature | -4 to 158°F (-20 to 70°C) |
| Storage Temperature | -49 to 158°F (-45 to 70°C) |
| Heating Capacity | See table (50 to 150 W) |
| Series | CS060 Series |
| Type | enclosure heater |
| Configuration | Touch-Safe |
| Supply voltage | 120 V AC/V DC to 240 V AC/V DC |
| Configuration | 100 W |
| Panel size | DIN Clip for 1.4" (35 mm) DIN Rail |
| Range | -49 to 158°F (-45 to 70°C) (-49°F to 158°F) |
| Configuration | 4.5 A Maximum Inrush Current |
| Operating Voltage | 120 to 240 V AC/V DC (minimum 110 V, maximum 265 V) |
| Heating Element | PTC resistor: temperature limiting |
| Protection Type/Protection Class | NEMA 2 (IP20)/II (double insulated) |
| Approvals | VDE |
| Surface Temperature | <176°F (<80°C), except upper protective grille |
| Connection | 4-pole terminal 2.5 mm2, torque 7.08 in-lb (0.8 Nm) maximum |
| Casing | Plastic according to UL94 V-0, black |
| Mounting | DIN clip for 1.4" (35 mm) DIN rail, EN 50022 |
| Fitting Position | Vertical |
| Operating Temperature | -4 to 158°F (-20 to 70°C) |
| Storage Temperature | -49 to 158°F (-45 to 70°C) |
| Heating Capacity | See table (50 to 150 W) |
