"Our job is helping you do your job"
Made for preheating applications, this circulation heater provides 600 W at 120 V. It has a 94 W/in2 watt density and a 316 SS sheath. It is used for laminating.
Made for preheating applications, this circulation heater provides 600 W at 120 V. It has a 94 W/in2 watt density and a 316 SS sheath. It is used for laminating.
The AHPF Series heaters are used to heat low flows of air, gas, water, or aqueous solutions. Applications include those where clean air is necessary, as in laboratories and environmental testing areas. Construction is 316 stainless steel.
Features
Applications
| Series | AHPF Series |
| Type | Circulation Heater |
| Voltage | 120 V |
| Power | 600 W |
| Watt density | 94 W/in2 |
| Maximum temperature | 806°F (430°C) |
| Sheath / material | 316 SS |
| Termination | Inline Mount |
| Construction | 316 stainless steel |
| Air/gas flow | up to 15 CFM |
| Outside diameter | 1 1/4" (32 mm) |
| Wattage tolerance | +5, -10% or better |
| Maximum outlet temperature | 806°F (430°C) |
| Construction material | 316 Stainless Steel Construction |
| Air/Gas Outlet Temperatures | up to 806°F (430°C) |
| Pressures | up to 100 psi (6.89 bar) |
| Cross Sectional Area | 0.152 square inches |
| Pressure Rating | Up to 100 psig (6.89 bar) |
| Inlet | Male 3/8" (9.5 mm) NPT |
| Outlet | 1/2" (12.7 mm) NPT |
| Series | AHPF Series |
| Type | Circulation Heater |
| Voltage | 120 V |
| Power | 600 W |
| Watt density | 94 W/in2 |
| Maximum temperature | 806°F (430°C) |
| Sheath / material | 316 SS |
| Termination | Inline Mount |
| Construction | 316 stainless steel |
| Air/gas flow | up to 15 CFM |
| Outside diameter | 1 1/4" (32 mm) |
| Wattage tolerance | +5, -10% or better |
| Maximum outlet temperature | 806°F (430°C) |
| Construction material | 316 Stainless Steel Construction |
| Air/Gas Outlet Temperatures | up to 806°F (430°C) |
| Pressures | up to 100 psi (6.89 bar) |
| Cross Sectional Area | 0.152 square inches |
| Pressure Rating | Up to 100 psig (6.89 bar) |
| Inlet | Male 3/8" (9.5 mm) NPT |
| Outlet | 1/2" (12.7 mm) NPT |
