"Our job is helping you do your job"
Made for preheating applications, this air process heater provides 400 W at 120 V. It has a 88 W/in2 watt density and an SS sheath. It is used for laminating.
Made for preheating applications, this air process heater provides 400 W at 120 V. It has a 88 W/in2 watt density and an SS sheath. It is used for laminating.
The AHP Series in-line air heaters are used to heat clean, dry air or gas for baking, drying, laminating, and similar applications, with exit air or gas temperatures to 1004°F (540°C) and infinite control by varying the voltage and/or the air flow.
Features
Applications
| Series | AHP Series |
| Type | Air Process Heater |
| Voltage | 120 V |
| Power | 400 W |
| Watt density | 88 W/in2 |
| Maximum temperature | 1004°F (540°C) |
| Sheath / material | SS |
| Termination | Inline Mount |
| Diameters | 3/8" (9.5 mm), 1/2" (12.7 mm) or 3/4" (19.1 mm) |
| Wattage tolerance | +5, -10% or better |
| Leads | 1' (0.3 m) fiberglass insulated |
| Exit Air or Gas Temperatures | to 1004°F (540°C) |
| Inlet Air or Gas Temperatures | to 250°F (121°C) |
| Mounting | For Horizontal Mounting |
| Fittings | With or Without NPT Fittings (add suffix "-NF" to order without NPT fittings) |
| Pressure Rating | 80 psig (5.52 bar) |
| Sheath | Stainless steel sheath |
| Element/support | Resistance element with ceramic coil support; silver solder; copper tee; epoxy seal; Heliarc weld; optional stainless steel or brass bushing |
| Series | AHP Series |
| Type | Air Process Heater |
| Voltage | 120 V |
| Power | 400 W |
| Watt density | 88 W/in2 |
| Maximum temperature | 1004°F (540°C) |
| Sheath / material | SS |
| Termination | Inline Mount |
| Diameters | 3/8" (9.5 mm), 1/2" (12.7 mm) or 3/4" (19.1 mm) |
| Wattage tolerance | +5, -10% or better |
| Leads | 1' (0.3 m) fiberglass insulated |
| Exit Air or Gas Temperatures | to 1004°F (540°C) |
| Inlet Air or Gas Temperatures | to 250°F (121°C) |
| Mounting | For Horizontal Mounting |
| Fittings | With or Without NPT Fittings (add suffix "-NF" to order without NPT fittings) |
| Pressure Rating | 80 psig (5.52 bar) |
| Sheath | Stainless steel sheath |
| Element/support | Resistance element with ceramic coil support; silver solder; copper tee; epoxy seal; Heliarc weld; optional stainless steel or brass bushing |
