Mitutoyo 543-854A Absolute Digital Indicator ID-F, 0-2" (0-50.8mm), SPC Output

Downloads: datasheet

Features a large Digital/Analog LCD display with background color change for Go/No Go determination.

Features

The external power supply eliminates the need to replace batteries for extended continuous operation
GO/±NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance
The PRESET button allows a reference point to be set at any spindle position. With the ABSOLUTE Linear Encoder technology, once the measurement reference point has been preset it will not be lost when the power is turned on
The ZERO/ABS button allows a display value to be zero-set at any spindle position. Press this button again to restore the absolute (ABS) coordinate
The maximum, minimum, or runout value can be displayed during measurement
An analog bar indicator has been integrated to handle upper/lower limit approaching and zero approaching. It enhances these of operation in the same manner as a dial indicator. The display range of the analog bar can be changed

Range	2" (50.8 mm)
Resolution	0.00002/0.00005/0.0001/0.0005/0.001" 0.005/0.001/0.01 mm (selectable)
Maximum Permissible Error MPE^*2	MPE_E^*3: ±0.00016" (0.004 mm) Hysteresis MPE_H: 0.00008" (0.002 mm) Repeatability MPE_R: 0.00008" (0.002 mm)
Measuring Force MPL (N)	2.3 or less
Interface	d1/d2/S1
Mass	11.64 oz. (330 g)

datasheet for the Mitutoyo 543-854A Absolute Digital Indicator ID-F, 0-2" (0-50.8mm), SPC Output

Features

The external power supply eliminates the need to replace batteries for extended continuous operation
GO/±NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance
The PRESET button allows a reference point to be set at any spindle position. With the ABSOLUTE Linear Encoder technology, once the measurement reference point has been preset it will not be lost when the power is turned on
The ZERO/ABS button allows a display value to be zero-set at any spindle position. Press this button again to restore the absolute (ABS) coordinate
The maximum, minimum, or runout value can be displayed during measurement
An analog bar indicator has been integrated to handle upper/lower limit approaching and zero approaching. It enhances these of operation in the same manner as a dial indicator. The display range of the analog bar can be changed

Range	2" (50.8 mm)
Resolution	0.00002/0.00005/0.0001/0.0005/0.001" 0.005/0.001/0.01 mm (selectable)
Maximum Permissible Error MPE^*2	MPE_E^*3: ±0.00016" (0.004 mm) Hysteresis MPE_H: 0.00008" (0.002 mm) Repeatability MPE_R: 0.00008" (0.002 mm)
Measuring Force MPL (N)	2.3 or less
Interface	d1/d2/S1
Mass	11.64 oz. (330 g)

datasheet for the Mitutoyo 543-854A Absolute Digital Indicator ID-F, 0-2" (0-50.8mm), SPC Output