Meriam M130 Thermocouple Calibrator

Model: M130

Meriam M130 Thermocouple Calibrator

Model: M130

Measure and source 8 thermocouple types plus millivolts.

Measure and source 8 thermocouple types plus millivolts.

Discontinued!

This product has been discontinued and is no longer available. There is no direct replacement. Don't worry, we have some options to help you find what you need:

Visit our Thermocouple Calibrators category for similar products.

Or let's do a search and help you find what you need:


Meriam M130 Offers

Features

  • Cold junction compensation
  • T/C simulation (manual or auto)
  • Automatic: the current value is automatically stored every 5 seconds, for up to 20 minutes
  • Manual: the current value is stored each time the Units key is pressed, up to 240 times
  • 3 programmable auto ramp routines (Units, T/C Type, LRV, URV, STEPS UP/DOWN TIME, DELAY)
  • Auto step simulation (0-100% or 25% increments) with definable LRV & URV

Functional Specifications

  • Thermocouple Types: Type B, E, J, K, N, R, S, T and millivolts
  • Accuracy: ±0.005% of reading ±6µV
  • Engineering Units: Displays the temperature of a T/C in °C, °F, °R, K and millivolts

General Specifications

  • Record Mode: Store up to 240 temperature measurements
  • Backlight: A green backlight is user activated via the backlight key. A red backlight is automatically activated during an over range condition
  • Auto Shutoff: Automatically powers off after 30 minutes of keypad inactivity
  • Low Battery Indication: Approximately 2 hours of run time remains when BAT appears

What's included with the Meriam M130

  • Meriam M130 Thermocouple Calibrator

Click on a category to view a selection of compatible accessories with the Meriam M130 Thermocouple Calibrator.

Meriam DAI2000 Absolute Pressure Module, 0 to 2000 mmHg DAI2000
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DGI2000 Gauge Pressure Module, 0 to 2000 psi DGI2000
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DGI0500 Gauge Pressure Module, 0 to 500 psi DGI0500
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DAI0900 Absolute Pressure Module, 0 to 900 mmHg DAI0900
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam GGI3000 Gauge Pressure Module, 0-3000 psi GGI3000
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam FDN0010 Differential Pressure Module, 0-10" H₂O FDN0010
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DGI1500 Gauge Pressure Module, 0 to 1500 psi DGI1500
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DGI0200 Pressure Module, 0 to 200 psi DGI0200
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DGI0020 Gauge Pressure Module, 0 to 20 psi DGI0020
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DAI5200 Absolute Pressure Module, 0 to 5200 mmHg DAI5200
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam FDN0020 Differential Pressure Module, 0-20" H2O FDN0020
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam M130 Offers

Features

  • Cold junction compensation
  • T/C simulation (manual or auto)
  • Automatic: the current value is automatically stored every 5 seconds, for up to 20 minutes
  • Manual: the current value is stored each time the Units key is pressed, up to 240 times
  • 3 programmable auto ramp routines (Units, T/C Type, LRV, URV, STEPS UP/DOWN TIME, DELAY)
  • Auto step simulation (0-100% or 25% increments) with definable LRV & URV

Functional Specifications

  • Thermocouple Types: Type B, E, J, K, N, R, S, T and millivolts
  • Accuracy: ±0.005% of reading ±6µV
  • Engineering Units: Displays the temperature of a T/C in °C, °F, °R, K and millivolts

General Specifications

  • Record Mode: Store up to 240 temperature measurements
  • Backlight: A green backlight is user activated via the backlight key. A red backlight is automatically activated during an over range condition
  • Auto Shutoff: Automatically powers off after 30 minutes of keypad inactivity
  • Low Battery Indication: Approximately 2 hours of run time remains when BAT appears

What's included with the Meriam M130

  • Meriam M130 Thermocouple Calibrator

Click on a category to view a selection of compatible accessories with the Meriam M130 Thermocouple Calibrator.

Meriam DAI2000 Absolute Pressure Module, 0 to 2000 mmHg DAI2000
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DGI2000 Gauge Pressure Module, 0 to 2000 psi DGI2000
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DGI0500 Gauge Pressure Module, 0 to 500 psi DGI0500
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DAI0900 Absolute Pressure Module, 0 to 900 mmHg DAI0900
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam GGI3000 Gauge Pressure Module, 0-3000 psi GGI3000
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam FDN0010 Differential Pressure Module, 0-10" H₂O FDN0010
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DGI1500 Gauge Pressure Module, 0 to 1500 psi DGI1500
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DGI0200 Pressure Module, 0 to 200 psi DGI0200
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DGI0020 Gauge Pressure Module, 0 to 20 psi DGI0020
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam DAI5200 Absolute Pressure Module, 0 to 5200 mmHg DAI5200
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




Meriam FDN0020 Differential Pressure Module, 0-20" H2O FDN0020
Any sensor module can be used in any calibrator without manual programming of coefficients. Pressure modules are designed to be recalibrated in the field with appropriate local calibration standards.




More Meriam Products