Meriam 30EBX25-TM-60-A Table Mount Well Type Manometer, 60"

Downloads: datasheet manual

These well-type manometers provide fast, direct readings of pressure, vacuum, differential, flow and liquid levels.

Yes, I would like to add a Traceable Calibration Certificate (Model CERTIMPG1) for only $110.00 USD

Yes, I would like to add a Traceable Calibration Certificate (Model CERTIMPG1) for only $110.00 USD

Features

Manometer body is of aluminum channel construction
7/16" outside diameter glass tubing is yoke packed with viton gaskets at each end block and is supported at spaced intervals to prevent tube distortion
Two Ω" female pipe connections are provided on the top side of the well; one outlet is normally used for the high pressure manometer connection, while the other, provided with a plug, is used as the well fill connection
Scale is graduated in linear inches and tenths of manometer fluid
Scale is graduated to correct for the drop in well level and is the full width of the instrument
Scale is adjustable for zero indicating fluid level by means of a non-slip, flexible shaft adjustment located in the lower end block and operated from the front of the instrument
Transparent plexiglass cover protects the unit from dust and moisture
Standard pressure connections in the upper end block and at the manometer well for connecting the instrument are Ω" female pipe connections
Suitable drain, fill and vent plugs are furnished with each unit
Red gauge oil (Model A-103) not supplied with manometer, must be ordered separately

datasheet for the Meriam 30EBX25-TM-60-A Table Mount Well Type Manometer, 60" manual for the Meriam 30EBX25-TM-60-A Table Mount Well Type Manometer, 60"

Features

Manometer body is of aluminum channel construction
7/16" outside diameter glass tubing is yoke packed with viton gaskets at each end block and is supported at spaced intervals to prevent tube distortion
Two Ω" female pipe connections are provided on the top side of the well; one outlet is normally used for the high pressure manometer connection, while the other, provided with a plug, is used as the well fill connection
Scale is graduated in linear inches and tenths of manometer fluid
Scale is graduated to correct for the drop in well level and is the full width of the instrument
Scale is adjustable for zero indicating fluid level by means of a non-slip, flexible shaft adjustment located in the lower end block and operated from the front of the instrument
Transparent plexiglass cover protects the unit from dust and moisture
Standard pressure connections in the upper end block and at the manometer well for connecting the instrument are Ω" female pipe connections
Suitable drain, fill and vent plugs are furnished with each unit
Red gauge oil (Model A-103) not supplied with manometer, must be ordered separately