Klein Tools 87468 Deceleration Unit with nylon webbing lanyard, 6'

Downloads: datasheet

The deceleration unit has steel locking snap hooks and nylon webbing. A red warning label tells you when it's time to replace the lanyard.

Features

Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap-hooks with 11/16-Inch (17 mm) throat opening
Deceleration unit is attached to 1-Inch (25 mm) wide orange nylon-webbing lanyard impregnated with resin for greater durability and abrasion resistance
Nylon-webbing lanyards are ideal for situations where the worker is often turning or moving around (webbing will not reverse-twist [hockle])
Designed solely for use in fall-arrest systems
Overlapped nylon webbing is heavily cross-stitched together with nylon thread and sewn into a protective break-away jacket for optimal fall-arrest impact reduction
A fully released deceleration unit extends the original length of a lanyard by a total of 3.5 ft (1.07 m) and virtually eliminates rebound
Deceleration units are available separately or with permanently attached lanyards made of nylon rope, aircraft cable, or nylon webbing
All Klein deceleration units are certified and compliant with ANSI and CSA requirements
On Klein deceleration units, a red warning label stitched to the overlapped nylon webbing inside the protective break-away jacket will identify a used lanyard and direct the disposal of the unit

Overall Width	5.4" (1.4 cm)
Cable Material	Nylon Webbing
Overall Height	2.475" (6.3 cm)
Overall Length	6' (1.8 m)
Adjustable Length	3.5" (1.1 m)
Included	Two (2) Drop-forged Steel, Corrosion-resistant Klein-Lok® Locking Snap-hooks
Standard	ANSI/CSA
Weight	2.3 lb (1 kg)

datasheet for the Klein Tools 87468 Deceleration Unit with nylon webbing lanyard, 6'

Features

Equipped with two drop-forged steel, corrosion-resistant Klein-Lok locking snap-hooks with 11/16-Inch (17 mm) throat opening
Deceleration unit is attached to 1-Inch (25 mm) wide orange nylon-webbing lanyard impregnated with resin for greater durability and abrasion resistance
Nylon-webbing lanyards are ideal for situations where the worker is often turning or moving around (webbing will not reverse-twist [hockle])
Designed solely for use in fall-arrest systems
Overlapped nylon webbing is heavily cross-stitched together with nylon thread and sewn into a protective break-away jacket for optimal fall-arrest impact reduction
A fully released deceleration unit extends the original length of a lanyard by a total of 3.5 ft (1.07 m) and virtually eliminates rebound
Deceleration units are available separately or with permanently attached lanyards made of nylon rope, aircraft cable, or nylon webbing
All Klein deceleration units are certified and compliant with ANSI and CSA requirements
On Klein deceleration units, a red warning label stitched to the overlapped nylon webbing inside the protective break-away jacket will identify a used lanyard and direct the disposal of the unit

Overall Width	5.4" (1.4 cm)
Cable Material	Nylon Webbing
Overall Height	2.475" (6.3 cm)
Overall Length	6' (1.8 m)
Adjustable Length	3.5" (1.1 m)
Included	Two (2) Drop-forged Steel, Corrosion-resistant Klein-Lok® Locking Snap-hooks
Standard	ANSI/CSA
Weight	2.3 lb (1 kg)

datasheet for the Klein Tools 87468 Deceleration Unit with nylon webbing lanyard, 6'