"Our job is helping you do your job"
The Isolation Transmitter IsoPAQ-161P is mainly used for isolation of bipolar signals, such as ±20 mA, ±10 mA, ±10 V, ±5 V, and conversion into unipolar output signals. For applications where normally one signal combination only is used, IsoPAQ-161P offers a cost-effective alternative. The high reliability and the Protective Separation are further features, which ensure a safe system operation.
The Isolation Transmitter IsoPAQ-161P is mainly used for isolation of bipolar signals, such as ±20 mA, ±10 mA, ±10 V, ±5 V, and conversion into unipolar output signals. For applications where normally one signal combination only is used, IsoPAQ-161P offers a cost-effective alternative. The high reliability and the Protective Separation are further features, which ensure a safe system operation.
Features
| Type of Input | Active |
| No. of Channels | 1 channel |
| Input Signal | ±10 mA ±20 mA ±5 V ±10 V 0 to 5 V |
| Output Signal | 0 to 20 mA 4 to 20 mA 0 to 5 V 0 to 10 V |
| Configuration | Fixed ranges |
| Typical Accuracy | 0.2% FS |
| Isolation Level | 2.5 kV, 50 Hz |
| Working Voltage | 600 VAC/DC |
| Power Supply | 24 VAC/DC |
| Protective Separation | Yes |
| Response Time | < 5 ms |
| Ambient Temperature | 32 to 131°F (0 to 55°C) |
| Bipolar Input | Ja |
| Housing Width | 0.44" (11.2 mm) |
| Installation Depth | 2.36" (60 mm) |
| Type of Input | Active |
| No. of Channels | 1 channel |
| Input Signal | ±10 mA ±20 mA ±5 V ±10 V 0 to 5 V |
| Output Signal | 0 to 20 mA 4 to 20 mA 0 to 5 V 0 to 10 V |
| Configuration | Fixed ranges |
| Typical Accuracy | 0.2% FS |
| Isolation Level | 2.5 kV, 50 Hz |
| Working Voltage | 600 VAC/DC |
| Power Supply | 24 VAC/DC |
| Protective Separation | Yes |
| Response Time | < 5 ms |
| Ambient Temperature | 32 to 131°F (0 to 55°C) |
| Bipolar Input | Ja |
| Housing Width | 0.44" (11.2 mm) |
| Installation Depth | 2.36" (60 mm) |
