"Our job is helping you do your job"
Use this strain unit to measure acceleration and more. The unit offers 2 channels for distortion measurements.
Use this strain unit to measure acceleration and more. The unit offers 2 channels for distortion measurements.
With the Hioki U8969 Strain Unit for MR6000, you can measure acceleration, load, pressure or strain waveforms. The 2-channel strain unit directly connects to the strain gauge converter and enables a maximum rated voltage to the ground of 30 V rms or 60 V DC. Conversion cables included.
Features
| Suitable Bridge Impedance | 120 Ω to 1 kΩ |
| Suitable Bridge Voltage | 2 V ±0.05 V |
| Measurement Range | 20 με to 1,000 με/div, 6 ranges |
| Measurement Resolution | 1/1,250 of measurement range |
| Maximum Sampling Rate | 200 kS/s (simultaneous sampling across 2 channels) |
| Measurement Accuracy | ±0.5% f.s. ±4 με (after auto-balancing) |
| Compatibility | Hioki MR6000, MR8847A, MR8827 and similar products (sold separately) |
| Isolated Input | Up to 30 V AC rms or 60 V DC from the earth |
| Resolution | 16-bit A/D high resolution |
| Number of Channels | 2 |
| Frequency | DC to 20 kHz +1/-3 dB |
| Input Terminal | NDIS connector EPRC07-R9FNDIS; PRC03-12A10-7M10.5 |
| Compliance | CE |
| Product Length | 7.74" (196.5 mm); 1.97' (60 cm) cord |
| Product Width | 4.17" (106 mm) |
| Product Height | 0.78" (19.8 mm) |
| Product Weight | 8.6 oz (245 g) |
| Manufacturer Warranty | 3 years |
| Suitable Bridge Impedance | 120 Ω to 1 kΩ |
| Suitable Bridge Voltage | 2 V ±0.05 V |
| Measurement Range | 20 με to 1,000 με/div, 6 ranges |
| Measurement Resolution | 1/1,250 of measurement range |
| Maximum Sampling Rate | 200 kS/s (simultaneous sampling across 2 channels) |
| Measurement Accuracy | ±0.5% f.s. ±4 με (after auto-balancing) |
| Compatibility | Hioki MR6000, MR8847A, MR8827 and similar products (sold separately) |
| Isolated Input | Up to 30 V AC rms or 60 V DC from the earth |
| Resolution | 16-bit A/D high resolution |
| Number of Channels | 2 |
| Frequency | DC to 20 kHz +1/-3 dB |
| Input Terminal | NDIS connector EPRC07-R9FNDIS; PRC03-12A10-7M10.5 |
| Compliance | CE |
| Product Length | 7.74" (196.5 mm); 1.97' (60 cm) cord |
| Product Width | 4.17" (106 mm) |
| Product Height | 0.78" (19.8 mm) |
| Product Weight | 8.6 oz (245 g) |
| Manufacturer Warranty | 3 years |
