GPI G8P Portable Fuel Transfer Pump

Downloads: datasheet manual

Connect the G8P to a power source and it's ready to fuel virtually any petroleum-powered vehicle or piece of equipment.

This high quality pump is built to do the job, whether it is for work or recreation.

This 12 V DC has a flow rate of up to 8 GPM (30 L/m), and it's 20% lighter than other available models
Out-of-the-box ready, with a factory-installed power cord
Just connect to a power source and you're ready to fuel any small vehicle, anywhere
The G8P housing is corrosion-resistant aluminum, and the 1100 RPM motor is U.L. Listed to U.S. and Canadian standards
Compatible with gasoline blends up to E15, diesel blends up to B20, and kerosene

Housing Material	Corrosion-resistant Aluminum
Pump Rate	Up to 8GPM (30 L/m)
Duty Cycle	15 minutes ON, 30 minutes OFF
Suction Lift	Up to 5.5' (1.7 m)
Operating Temperature	-20 to 125°F (-29 to 52°C)
Operating Pressure	10 psi/0.69 bar
Input	12 V DC
Current Draw	15 A
Motor	1100 RPM, 1/10 HP
Motor Approval	UL listed to US and Canadian Standards

G8P Portable Fuel Transfer Pump
Attached Power Cord 12' (3.6 m) with Inline Fuse, Inline Switch, and 2 x Alligator Clamps
Dispensing Hose, 8' x 5/8" (2.4 m x 1.6 cm)
Suction Hose, 8' x 5/8" (2.4 m x 1.6 cm)
Ground Lead, 8' (2.4 m) x 16 ga
Hose Strainer
Manual Shut-off Nozzle
2 x Thread Tape

datasheet for the GPI G8P Portable Fuel Transfer Pump manual for the GPI G8P Portable Fuel Transfer Pump

This high quality pump is built to do the job, whether it is for work or recreation.

This 12 V DC has a flow rate of up to 8 GPM (30 L/m), and it's 20% lighter than other available models
Out-of-the-box ready, with a factory-installed power cord
Just connect to a power source and you're ready to fuel any small vehicle, anywhere
The G8P housing is corrosion-resistant aluminum, and the 1100 RPM motor is U.L. Listed to U.S. and Canadian standards
Compatible with gasoline blends up to E15, diesel blends up to B20, and kerosene

Housing Material	Corrosion-resistant Aluminum
Pump Rate	Up to 8GPM (30 L/m)
Duty Cycle	15 minutes ON, 30 minutes OFF
Suction Lift	Up to 5.5' (1.7 m)
Operating Temperature	-20 to 125°F (-29 to 52°C)
Operating Pressure	10 psi/0.69 bar
Input	12 V DC
Current Draw	15 A
Motor	1100 RPM, 1/10 HP
Motor Approval	UL listed to US and Canadian Standards

G8P Portable Fuel Transfer Pump
Attached Power Cord 12' (3.6 m) with Inline Fuse, Inline Switch, and 2 x Alligator Clamps
Dispensing Hose, 8' x 5/8" (2.4 m x 1.6 cm)
Suction Hose, 8' x 5/8" (2.4 m x 1.6 cm)
Ground Lead, 8' (2.4 m) x 16 ga
Hose Strainer
Manual Shut-off Nozzle
2 x Thread Tape

datasheet for the GPI G8P Portable Fuel Transfer Pump manual for the GPI G8P Portable Fuel Transfer Pump