"Our job is helping you do your job"
A single range 200 A clamp-on AC current clamp with current output via safety shrouded banana plugs. It is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
A single range 200 A clamp-on AC current clamp with current output via safety shrouded banana plugs. It is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.
Features
| Nominal Current Range | 200 A |
| Continuous Current Range | 0.5 to 200 A |
| Maximum Non-Destructive | 240 A |
| Lowest Measurable Current | 0.5 A |
| Basic Accuracy | 1.5% + 0.5 A (48 to 65 Hz) (% reading + floor spec) |
| Useable Frequency | 40 Hz to 10 kHz |
| Output Level(s) | 1 mA/A |
| Safety | CAT III, 600 V |
| Maximum Voltage | 600 V AC |
| Maximum Conductor Diameter | 0.8" (20 mm) |
| Maximum Conductor Size (busbar) | 0.8 x 0.2" (20 x 5 mm) |
| Output Cable Length | 4.9' (1.5 m) |
Click on a category to view a selection of compatible accessories with the Fluke i200 AC Current Clamp.
| Nominal Current Range | 200 A |
| Continuous Current Range | 0.5 to 200 A |
| Maximum Non-Destructive | 240 A |
| Lowest Measurable Current | 0.5 A |
| Basic Accuracy | 1.5% + 0.5 A (48 to 65 Hz) (% reading + floor spec) |
| Useable Frequency | 40 Hz to 10 kHz |
| Output Level(s) | 1 mA/A |
| Safety | CAT III, 600 V |
| Maximum Voltage | 600 V AC |
| Maximum Conductor Diameter | 0.8" (20 mm) |
| Maximum Conductor Size (busbar) | 0.8 x 0.2" (20 x 5 mm) |
| Output Cable Length | 4.9' (1.5 m) |
Click on a category to view a selection of compatible accessories with the Fluke i200 AC Current Clamp.
